NS-200FC 1 Port Ethernet + Fibre Switch (SC)

Description

The NS-200FC is an Ethernet(10/100Base-TX) to Fibre Optics(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.

The NS-200FC operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fibre cables; in half duplex mode, range is 412m with 62.5/ 125μm fibre cables.

It contains a "soft start" function with overload protection and high-low voltage protection.

The width of the NS-200FC is just 32.30 mm, so it can be used where space is important.

Features

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.4 Gbps high performance memory bandwidth.
• Integrated look-up engine with dedicated 1K unicast MAC addresses.
• Supports +10 ~ +30Vdc voltage
  Reverse Polarity Protection
• Supports operating temperatures from 0 ~ +70°C
• DIN Rail Mounting for Industrial use

Specifications

Technology

• Standards : IEEE802.3, 802.3u, 802.3x
• Processing Type : Store & forward wire speed switching - no delays
• MAC Addresses : 1024
• Memory Bandwidth : 1.4Gbps
• Flow Control : IEEE802.3x flow control, back pressure flow control

Interface

• RJ45 Ports : 10/100 Base-T(X) auto negotiation speed, F/H duplex mode,
  and auto MDI/MDIX connection
• Fibre Optic Port : 100 Base-FX (Multi-mode; SC Connector)
• LED Indicators : 10/100M, Link/Act, Full/Half Duplex (Fibre Port)
• Ethernet isolation : 1500 Vrms 1 minute
• Frame Ground for EMS Protection : Yes
• Fibre Optic : Multi-mode fibre cables : 50/125, 62.5/125 or 100/140µm
  Distance : 2km (62.58/125µm recommended) for full duplex
  Wavelength : 1300 or 1310 nm
  Min. Tx Output : -20 dBm
  Max. Tx Output : -14 dBm
  Rx Sensitivity : -34 to -31 dBm
• Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
  Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm

Power

• Input Voltage : +10 ~ +30VDC (non-isolation)
• Power Consumption : 0.12A@24VDC, +/- 5% arrowed with 100M Full duplex
• LED Indicator : Yes
• Protection : Power reverse polarity protection
• Frame Ground for EMS Protection : Yes
• Connection : 3-Pin Removable Terminal Block

Mechanical

• Case : Plastic
• Flammability : UL94V-0
• Dimensions : 32.3mm x 99mm x 77.5mm (W x H x D)
• Installation : DIN Rail Mount

Environmental

• Operating Temperature : 0 to 70 °C
• Storage Temperature : -20 to +85 °C
• Ambient Relative Humidity : 10% to 90% non-condensing

Technical

User Manual