Converters are used to convert from one communication protocol to another such as RS232 to RS422. Repeaters are used in circumstances where it is necessary to extend the distance of a network. We offer a wide range of serial and USB converters, repeaters and hubs for a variety of applications.
USB-RS232 or RS485 / RS422 Conversion, RS232 to RS485 or RS422 conversion. RS485/RS422 Repeaters add isolation and extend networks. An RS485 Hub unit is used to create network redundancy or physical layout.
Module with selectable termination and pull-up/pull-down resistors to improve RS485 communication
Isolated Serial Port sharing/converter device (3x RS232 ports)
Isolated Serial Port sharing/converter device (3x RS485 ports)
This RS-485/RS422 high speed Isolated repeater can be used to boost the signal and provide isolation between different sections of a network. It is also able to convert between 4-wire RS422 and 2-wire RS485.
3-Way Isolated RS485 / RS422 repeater and converter module
4-channel RS-485 Active Star Hub, providing 4 independant RS485 Output channels and a single input channel. Other features include RS485 short circuit protection, internal jumper selectable termination resistors, LED indicators for power and network traffic.
Isolated RS232 Input to 4-port RS485 Active Star Output Hub
The I-7520AR is a high-performance low-cost RS-232 to RS-422 or RS-485 isolated converter packaged for convenience in a compact DIN rail mounted unit.
The I-7520R is a high-performance low-cost RS-232 to RS-485 converter packaged for convenience in a compact DIN rail mounted unit.
The I-7563U is a cost-effective module for transferring serial data over USB. It allows you to connect serial devices to systems using a USB interface. Suitable for use with Operating Systems including Windows 10.
RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1550 nm, RX 1310 nm Product contains I-2542-A & I-2542-B