Accessories for Measurement Computing Products
82 Products
Sort Order
K-type thermocouple wire, fiberglass (0 °C to 482 °C, 32 °F to 900 °F) 1 m
3-wire, 100 ohm RTD, sealed with alumina tube, 1 m
3-wire, 100 ohm RTD, platinum (ready made), 2 m
2-position connector kit for the USB-2404-10 and USB-2404-60. Quantity of 10
Backshell kit for the USB-2404-10 & the USB-2404-60. Includes 4 backshells
4 extra 6-position connectors for the USB-2404-UI
Coaxial cable, 3 ft, with 10-32 plug to BNC jack (2 qty)
Backshell kit for use with the USB-2404-UI (qty of 4)
DIN-Rail Kit for BTH-1208LS, E-1608, and USB-200 Series
DST kit with 6 detachable screw terminals
36-position detachable spring terminal for WebDAQ
6-position detachable screw terminal (2off) for WebDAQ
Panel/wall mounting kit for WebDAQ Series hardware; use with the ACC-205 to mount on a DIN rail
6-position detachable screw terminal (4off) for WebDAQ 904
Analog Input Expansion Module for USB-2416 Series
Kit for mounting the DT980X Series USB modules to a DIN rail (Metal Box/BNC connector versions). Horizontal or vertical mounting fits any application. Includes mounting clips, screws, mounting adaptor, and instructions. Rail not included.
50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 1 ft.
Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 2 ft.
Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 3 ft.
Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 5 ft.
Cable, 50-conductor ribbon, high-density 100-pin to dual 50-pin, 3 ft.
Cable, 50-conductor ribbon, high-density 100-pin to dual 50-pin, 6 ft.
Cable, shielded, 100-conductor, male to male, 1 meter
Cable, shielded, 100-conductor, male to male, 2 meter
Cable, DB37F to 4 x DB9F for PCI-QUAD04, 1 meter
2 feet long, 37-pin cable with female D type connectors on each end. Available in 1, 2, 3, 4, 5, 10, 15, 20, 25, and 50-foot lengths. For these lengths, order the C37FF-#, where # is the desired cable length in feet.
5 feet long, 37-conductor shielded cable. 37-pin female D connectors on each end.
50 conductor cable, female connectors on both ends. Available in 1, 2, 3, 4, 5, 10, 15, 20, 25, and 50 foot lengths. For these lengths, order the C50FF-# where # is the desired cable length in feet.
50 conductor cable, female connectors on both ends. Available in 1, 2, 3, 4, 5, 10, 15, 20, 25, and 50 foot lengths. For these lengths, order the C50FF-# where # is the desired cable length in feet.
100-conductor expansion cable, mates DaqBoard/2000 series with DBK200, DBK201, DBK202, DBK203, DBK206, DBK207, DBK207/CJC, and DBK209, 3 ft.
100-conductor expansion cable, mates DaqBoard/2000 series with DBK200, DBK202, DBK203A, DBK206, DBK207, DBK207/CJC, DBK208, and DBK209, 6 ft.
Ethernet patch cable, 0.609 meter (2 ft.)
Ribbon cable, 40-pin header to 37 pin DSUB, 9 in.
Ribbon cable for use with 1 DBK device attached, 7 in.
Cable, 68-conductor ribbon, 3 ft.
USB-1616HS Series to AI-EXP48 cable; Personal Daq/3000 Series to PDQ30 cable, 2 ft.
Universal screw-terminal board, 37-pin
Universal screw-terminal board, 50-pin
Terminal block for USB-1616HS Series and IOtech Personal Daqs
Upgrade DASYLab Full to DASYLab Pro
Kit for mounting DT980X Series USB modules to a DIN rail.
Screw terminal panel with two connectors to accommodate the analog I/O, digital I/O, and counter/timer signals for the DT3016 and DT3034
Kit for mounting ECON Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, and instructions. Rail not included.
50-pin one meter shielded cable for analog signals for DT3016 and DT3034
50-pin 3 meter shielded cable for analog signals for DT3016 and DT3034
68-pin one meter shielded cable for digital signals for the DT3016 and DT303
68-pin 3 meter shielded cable for digital signals for the DT3016 and DT3034
Mating Terminals for DT9800-Series Spare sets of six terminal blocks for ease of system installation
Screw terminal panel. Provides a 14-position screw terminal block for attaching analog input, digital I/O, counter/timer, and clock signals. For OEM configurations only.
2-meter shielded cable with two 37-pin connectors that connects an EP353 accessory panel to an STP37 screw terminal panel. (Can be used with the -BNC and -OEM versions for analog input connections.)
+5V power supply and cable. Required for OEM configurations.
RJ45 Patch Panel, contains four RJ45 connectors that are wired in parallel, to connect four DT9837, DT9838, and/or DT9847 modules together using the Sync Bus
1.52-meter cable with two 78- pin connectors that connect the STP78 screw terminal panel to the DT9862. Can be used with enclosure and -OEM versions.
5 VDC External Power Supply for DT7816, DT9838/DT9847
RJ50 Cables for DT9838 connection panels (qty 4) 1.8m length
Replacement PSU for USB-1602HS, USB-1604HS, USB-1608HS, USB-2416, USB-311x series and WEB-TC +WEB-TEMP Devices
Replacement power supply, 15-watt, for USB-DIO96H, USB-DIO96H/50 - interchangeable plugs available separately
Input: 100-240V, 50-60 Hz Includes IEC power cord with UK plug.
Replacement 230 V power supply, 9 V output, for SwitchAndSense-8/8, USB-2020, USB-ERB08, USB-PDISO8, USB-PDISO8/40, USB-SSR08, USB-SSR24 -Supplied with UK plug fitting.
Solid-State Relay Module, Quad, VDC Input, 3.3 to 32 VDC
Solid State Relay Module, Single, AC Sense, 90 to 140 VAC/VDC
Solid State Relay Module, Single, AC Sense, 180 to 280 VAC/VDC
Solid-State Relay Module, Single, DC Sense, 10 to 32 VDC (or 12-32Vac)
Solid-State Relay Module, Single, AC Switch, 24 to 140 VAC, 3.5 A @ 120 VAC
Solid-State Relay Module, Single, AC Switch, 24 to 280 VAC, 3.5 A @ 240 VAC
Solid-State Relay Module, Single, DC Switch, 5 to 60 VDC @ 3 A
Solid-State Relay Module, Single, DC Switch, 5 to 200 VDC, 1 A
Screw Terminal Panels for DT9838 (qty 4)
Screw terminal panel. Allows connections to analog input (except with MEASURpoint), digital I/O, counter/timer, and trigger signals.
Screw Terminal Board for use with USB-2500/2600 series
Termination board with screw terminals (mates directly onto USB-2500 Series and DaqBoard/3000 USB Series boards)
Termination board with screw terminals
Termination Board with Screw Terminals for USB-2600 Series
External power supply, 90 to 264 VAC
External power supply, 100 to 240 VAC, 50W, 15 VDC, with UK mains cable
UK interchangeable plug for power supplies