This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

I-7540D Ethernet To CAN Bus Gateway

I-7540D Ethernet to CAN Bus Gateway
£24800

(£297.60 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:I-7540D

Description

Internet communications using TCP/IP is increasing in the industrial sector. Using Ethernet for networking in industrial areas is appealing because the required cabling is already installed. The CAN-Ethernet Gateway is a solution that enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. The CAN-Ethernet Gateway controls networked communication and makes a transparent CAN-based application interface available to the user.

The I-7540D device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. Furthermore, the CAN-Ethernet Gateway can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols).

Furthermore, the I-7540D can also be used as an Ethernet to CAN/RS-232/485 Device Server. The Device Server is an appliance that network enables any device with a serial communication port. By virtue of its independent operating system, protocol independence, small size and flexibility, the Device server is able to meet the demand of virtually any network-enabled application. Many devices don't have network ports. The I-7540D allows those devices to become connected to the network.

 

Features

  • 80186-80 Embedded CPU, or compatible
  • Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
  • 10/100 Base-TX Ethernet Controller
  • Reloadable Operating Software
  • Message transmitted by using TCP/IP protocol
  • Diagnostics
  • COM driver support interrupt & 1K QUEUE Input & Output buffer
  • Support one RS-232 port, one RS-485 port and one CAN port
  • 2500Vrms photo-isolation protection on CAN side.
  • Jumper select 120Ω terminator resistor for CAN channel
  • Philips 82C 250/251CAN Transceiver
  • Support both CAN specification 2.0A and 2.0B.
  • Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-232 & RS-485
  • Max transmission distance of CAN over 1000m (follow CAN specification)
  • Built-in self-tuner ASIC controller on RS-485 port
  • 7-segment LED display.
  • Software configurable CAN and RS-232 communication parameters
  • Firmware updated from COM1 or Ethernet port
  • Support Web Configuration
  • Support max 25 Ethernet clients connection
  • Support for Virtual COM technology

Specifications

CPU

  • Type : 80186, 80MHz or compatible
  • SRAM : 512K Bytes
  • Flash : 512K Bytes
  • EEPROM : 16K Bytes
  • NVRAM : 31 Bytes (battery backup, data valid up to 10 year)
  • RTC (Real Time Clock) : Yes
  • 64-bit Hardware Serial Number : Yes
  • Built-in Watchdog Timer : Yes

Communication Interface

  • COM1 : RS-232 (TXD, RXD, RTS, CTS, GND)
  • COM2 : RS-485 (D2+, D2-)
  • CAN : One CAN port with two CAN bus connector interfaces (CAN_H, CAN_L)
  • Ethernet Port : 10/100Base-TX Ethernet Controller
    (Auto-negotiating, Auto_MDIX, LED indicator)

COM Port Formats

  • Data Bit : 7,8
  • Parity : Even, Odd, None
  • Stop Bit : 1
  • Baud-rate : 115.2 Kbps max.

CAN Port

  • CAN Controller : Philips SJA1000T CAN Controller
  • CAN Transceiver : Philips 82C250 CAN Transceiver
  • Isolated : 2500Vrms on CAN side
  • Baud-rate : 1Mbps max.

Dimensions

123 x 72 x 33 mm (W x D x H)

Environment

  • Operating Temperature : -25 to 75 °C
  • Storage Temperature : -40 to 80 °C

Power

  • Protection : Power reverse polarity protection
  • Frame Ground for ESD Protection : Yes
  • Required Supply Voltage : +10 to +30VDC (non-regulated)
  • Power consumption : 2.5W

Description

Internet communications using TCP/IP is increasing in the industrial sector. Using Ethernet for networking in industrial areas is appealing because the required cabling is already installed. The CAN-Ethernet Gateway is a solution that enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. The CAN-Ethernet Gateway controls networked communication and makes a transparent CAN-based application interface available to the user.

The I-7540D device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. Furthermore, the CAN-Ethernet Gateway can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols).

Furthermore, the I-7540D can also be used as an Ethernet to CAN/RS-232/485 Device Server. The Device Server is an appliance that network enables any device with a serial communication port. By virtue of its independent operating system, protocol independence, small size and flexibility, the Device server is able to meet the demand of virtually any network-enabled application. Many devices don't have network ports. The I-7540D allows those devices to become connected to the network.

 

Features

Specifications

CPU

Communication Interface

COM Port Formats

CAN Port

Dimensions

123 x 72 x 33 mm (W x D x H)

Environment

Power

Technical

I-7540D/DM Datasheet

Recently Viewed Products