Daughter Boards & Cables
44 Products
Sort Order
40-pin flat & D-sub 37-pin Female cable 24 cm Cable for PISO/PEX-DIO Series
![CA-9-3715D DB37 Male to 4 x DB9 Male Cable [RS-232/422/485]](https://www.measurementsystems.co.uk/images/products/results/ca-9-3715d-db37-male-to-4-x-db9-male-cable--rs-232-422-485-.jpg)
DB37 Male to 4 x DB9 Male Cable [RS-232/422/485], 1.5M
9-Pin Male D-sub to 10-Pin RJ-45 Cable (30cm).
This cable allows the DB-1820 to be seperated from the I-87018Z. The DB-1820 can then be mounted on the DIN-Rail next the the I-8000 expansion unit.
16-ch Isolated Input & 8-ch Relay Board with DIN-rail Mounting Include: CA-3710 (DB37 Male to Male, 45º, 1M)
Female DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting. Includes: CA-3710 (DB37 Male to Male, 45º, 1M)
I/O Connector Block (Pitch= 3.81 mm) with DIN-Rail Mounting and Male-Female D-sub Cable 1M (45°) I/O Connector Block with DIN-Rail Mounting
I/O Connector Block with DIN-Rail Mounting Two 37-pin D-sub connector (One for expansion) Pin to Pin screw terminal for I/O connected Pitch : 5.08 mm Dimension : 148mm x 76mm Include :37-pin Female-Mal
DIN-Rail Mountable I/O Connector Block With 68-pin SCSI-II Female Connector
The DN-8K16P16R is a16-channel DI, 16-channel relay (Form A, 3A) Terminal Board (Pitch= 3.81 mm) with DIN-rail Mounting (RoHS) Includes: CA-3705A (DB37 Male to Female Cable, 90º, 0.5 M)
The DN-8K32R is a 32-channel of Signal Relay Output Board, consisting of 32 form A relays for efficient programmable load switching. All connectors and functionalities are compatible with the I-8041 and I-87041 Open-collector output board.
Screw terminal board using two 20 pin cable connector Compatible to 780 series daughter board Dimensions :114mm x 102mm Supplied with CA-2002 2x 20 way 20cm ribbon cable to connect to Data Acquisition Card.
Screw terminal board converting from a 50 Way Ribbon cable to a 37 pin d-Sub connector Compatible to 780 series daughter board Dimensions :114mm x 102mm Supplied with CA-5002 (50-pin Flat Cable 0.2m) to connect to Data Acquisition Card.
Screw terminal board converting from a 50 Way Ribbon cable to a 50 pin IDC Socket connector Compatible to 780 series daughter board Dimensions :114mm x 102mm Supplied with CA-5002 (50-pin Flat Cable 0.2m) to connect to Data Acquisition Card.
50 Way Flat Ribbon Cable 1.5m length.
SCSI II 68-pin & 68-pin Male connector cable 1.5M, Cable for PISO-ENCODER600/300
The DB-16P is a 16 channel isolated digital input daughter board for A-82X board or any 812pg,711 726 , 720 series board, and PCI-Bus Multi-function board.
The DB-16R 16 channel Relay Output Board consists of 16 form C relays for efficient switch of load by programmed control.
Screw terminal board using 37 pin cable I/O ports for PCI1802 series , (32 channel single-ended ,16 channel differential) Blank pads for break detection , low-pass filter , current shut and voltage attenuation. Dimensions :170mm x 114mm
screw terminal board using 37 pin cable I/O ports for PCI1802 series , (32 channel single-ended ,16 channel differential) Blank pads for break detection , low-pass filter , current shut and voltage attenuation. Dimensions :170mm x 114mm
The DB-24P is a 24 channel isolated digital input daughter board for the PIO-Dxx range of OPTO-22 Compatible digital input boards or any 722,724 digital input board .
Digital I/O Expansion Board for WISE-5800 Data Logger and PMC-5141 Power Concentrator (8 DI/ 8 DO)
The DB-24P is a 24 channel isolated digital input daughter board for the PIO-Dxx range of OPTO-22 Compatible digital input boards or any 722,724 digital input board.
The RM-104 has 4 channels with SPDT Relays, with a set of NC & NO contacts for each channel. These units are ideal for protecting Data Acquisition circuitry against overloads and allow handling of larger loads.
The RM-204 has 4 channels with DPDT Relays, with a set of 2x NC & 2x NO contacts for each channel. These units are ideal for protecting Data Acquisition circuitry against overloads and allow handling of larger loads.
Single Pole, Form C, 16 A power relay, DIN-rail mounting (4 in one box)
Single SPDT Relay Module converts a Digital Output (12Vdc) to a Mains rated volt-free contact (up to 10A)
Relay module that allows a 0-10V signal to trigger an SPCO Relay output, with adjustable setpoint.
Isolated Digital I/O Expansion Board for WISE-5800 Data Logger and PMC-5141 Power Concentrator (8 DI/ 8 DO)
The DB-24P is a 24 channel isolated digital input daughter board for the PIO-Dxx range of OPTO-22 Compatible digital input boards or any 722,724 digital input board.
The DB-24P is a 24 channel isolated digital input daughter board for the PIO-Dxx range of OPTO-22 Compatible digital input boards or any 722,724 digital input board.
24-ch Power Relay Board with DIN-rail Mounting (24V) Includes: CA-3710 (DB37 Male to Male, 45º, 1M)
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control.
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control.
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. DIN Rail Mounting, 24V ext. supply.
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control . The contact of each relay can control a 0.5 A /110 V load or 1A / 24VDC . The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin Opto-22 compatible connector or D-Sub 37 c...
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. DIN Rail Mounting, 24V ext. supply. 37 pin D-type conn.
37 pin male D-sub connector pin to pin screw terminal for any 37 pin D-sub connector of I/O board Dimensions:130mmX78mm
Screw terminal board using 37 pin cable I/O ports for A-82X series , PCI-1800 series. (16 channel single-ended or 8 channel differential) link pads for break detection , low-pass filter , current shunt and voltage attenuation. On board cold junction circuit in analog input channel 1 (jumper selectable single-ended , diff...
Screw terminal board using 37 pin cable I/O ports for ISO-813 , PISO-813 only Dimensions :220mmX114mm
Connector interface for PISO-DA2 Screw terminals for easy field wiring 9-pin D-sub connector pin to pin screw terminal for PISO-DA2 Supplied with 1.5m 9-pin d-sub cables
I/O Connector Block (Pitch= 381 mm) with DIN-Rail Mounting and 100-pin SCSI II female connector (RoHS). Includes one CA-SCSI100-15 (SCSI II 100-pin & 100-pin Male connector cable 1.5 M)
I/O Connector Block with DIN-Rail Mounting Two 20-pin header Pin to Pin screw terminal for I/O connected Pitch : 5.08 m/m Dimension : 147mm x 75mm
I/O Connector Block with DIN-Rail Mounting One 50 pin header Pin to Pin screw terminal for I/O connected Pitch : 5.08 m/m Dimension : 148mm x 76mm Include :CA-5015(50-pin Flat Cable 1.5m)
