This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

SSR1D Solar Radiation Sensor

SSR1D  Solar Radiation Sensor
£20000

(£240.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:SSR1D

Description

The SSR1D solar radiation sensor uses a photodiode as the sensing element. The device has been designed for constant outdoor use and the radiation is measured on the whole hemisphere with the full sight vision of 180°.

The sensor works great in photovoltaic, food farming, thermal convection and evaporation systems. It is fully compatible with MicroPower Weather Stations/data loggers and devices which allow a 0-3V voltage input.

 

 

Features

  • High acccuracy of measurements
  • Excellent characteristics
  • IP67 Waterproof enclosure made of anodized aluminium
  • Output signal 0-3V
  • Low power consumption

Specifications

  • Working temperature -40 …. +65°C
  • Output signal 0-4.9V
  • Supply voltage 3.3-15V DC, allowed ripple voltage - 100mV
  • Sensing element fotodiode
  • Radiation intensity range 0 … 2500 W/m2
  • Sensitivity range 400 – 1100 nm
  • Accuracy +/- 5%
  • Sensitivity 1.96mV per W/m2
  • Response time <1 second
  • Non-linearity <+/- 1%
  • Long-term stability <+/-2% yr
  • Temperature influence on the measurement <+/-0,15%/oC
  • Ingress Protection (IP) IP67
  • Weight 138g
  • Cable length 2m, optional extension

Applications

The calibration of the sensor was made for natural, unshaded daylight.
In case of artificial light, the measured data will be not correct.
In most cases the sensor is used to measure solar radiation reaching a flat surface, however if need be, the sensor can be used in reversed or slanted position.
The enclosure is made of anodized aluminium with ingress protection IP67.
The sensor may be used in every weather condition.

Description

The SSR1D solar radiation sensor uses a photodiode as the sensing element. The device has been designed for constant outdoor use and the radiation is measured on the whole hemisphere with the full sight vision of 180°.

The sensor works great in photovoltaic, food farming, thermal convection and evaporation systems. It is fully compatible with MicroPower Weather Stations/data loggers and devices which allow a 0-3V voltage input.

 

 

Features

Specifications

Technical

SSR Solar Radiation Sensor Datasheet

Applications

The calibration of the sensor was made for natural, unshaded daylight.
In case of artificial light, the measured data will be not correct.
In most cases the sensor is used to measure solar radiation reaching a flat surface, however if need be, the sensor can be used in reversed or slanted position.
The enclosure is made of anodized aluminium with ingress protection IP67.
The sensor may be used in every weather condition.

Recently Viewed Products