This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

MCC-118-OEM Voltage Measurement DAQ HAT For Raspberry Pi (No Hdrs)

MCC-118-OEM Voltage Measurement DAQ HAT for Raspberry Pi (No hdrs)
£9900

(£118.80 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:MCC-118-OEM
Delivery to UK Only

Description

The MCC 118-OEM provides eight single-ended (SE) analog inputs for voltage measurements with sample rates up to 100 kS/s for taking single point or waveform voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi providing up to 64 channels of data and a maximum throughput of 320 kS/s.   
 
The MCC 118-OEM is functionally equivalent to the standard version. The only difference is the screw terminal connectors have been removed. The OEM version is designed with unpopulated connectors for customers who want to add their own header type connectors. The board accepts 1x6 and 1x10 0.1” spacing header connectors. 


NOTE: Raspberry Pi is not included with the MCC 118-OEM.

Features

  • Eight 12-bit voltage inputs
  • Sample rate up to 100 kS/s
  • ±10 V input range
  • Onboard sample buffers allow high-speed acquisition
  • External scan clock I/O
  • External digital trigger input
  • Unpopulated signal connectors
  • Ability to stack up to eight MCC HATs onto a single Raspberry Pi for a maximum throughput of 320 kS/s 
 
 
Included in the package:
  • Getting Started guide
  • Hardware required to connect to a Raspberry Pi (connector, standoffs, screws, nuts, and jumpers) 
 
System Requirements: Raspberry Pi A+, B+, 2, 3 or later 

Specifications

ANALOG INPUT
CHANNELS RESOLUTION MAX SAMPLE RATE
8 SE 12-bit 100 kS/s
SAMPLING RANGES ISOLATION
Multiplexed ±10 V
ANALOG OUTPUT
CHANNELS RESOLUTION SPEED
DIGITAL I/O
CHANNELS COUNTER/TIMERS ENCODER
SOFTWARE POWER
OS SUPPORT DRIVERS POWER
Linux®, Raspbian® DAQ HAT Library™ 3.3 V provided by Rpi

 

Description

The MCC 118-OEM provides eight single-ended (SE) analog inputs for voltage measurements with sample rates up to 100 kS/s for taking single point or waveform voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi providing up to 64 channels of data and a maximum throughput of 320 kS/s.   
 
The MCC 118-OEM is functionally equivalent to the standard version. The only difference is the screw terminal connectors have been removed. The OEM version is designed with unpopulated connectors for customers who want to add their own header type connectors. The board accepts 1x6 and 1x10 0.1” spacing header connectors. 


NOTE: Raspberry Pi is not included with the MCC 118-OEM.

Features

 
 
Included in the package:
 
System Requirements: Raspberry Pi A+, B+, 2, 3 or later 

Specifications

ANALOG INPUT
CHANNELS RESOLUTION MAX SAMPLE RATE
8 SE 12-bit 100 kS/s
SAMPLING RANGES ISOLATION
Multiplexed ±10 V
ANALOG OUTPUT
CHANNELS RESOLUTION SPEED
DIGITAL I/O
CHANNELS COUNTER/TIMERS ENCODER
SOFTWARE POWER
OS SUPPORT DRIVERS POWER
Linux®, Raspbian® DAQ HAT Library™ 3.3 V provided by Rpi

 

Technical

MCC-118 Voltage Measurement DAQ for Raspberry Pi® Datasheet

MCC DAQ HAT White Paper

MCC DAQ Library Help

Recently Viewed Products