TSH-732i Isolated Serial Port Sharer (3 X RS232) PoE

Description

Following the success of the original tGW-700/tDS-700 modules, ICP DAS has continued to develop new functions for these products in order to provide increased support for a greater number of applications. The tSH-700 module is a serial port sharer that provides a number of functions, including "Baud Rate Conversion", "Modbus RTU/ASCII Conversion" and "Two Masters Share One Slave". The built-in web server provides easy configuration interface, and no console commands are required.

• Baud Rate Conversion: This function allows a single master device to communicate with slave devices using different baud rates and data formats. Most query-response protocols (half-duplex), e.g. DCON, are supported in the raw data mode. Full-duplex communication should also work when the data size is smaller than the built-in 512 bytes buffer on each serial port.
• Modbus RTU/ASCII Conversion: This function allows a single Modbus RTU/ASCII master device to communicate with Modbus RTU/ASCII slave devices using different protocols, baud rates and data formats.

Features

• Supports Baud Rate conversion application
• Supports Modbus RTU/ASCII protocol conversion
• Supports two masters sharing one slave port for tSH-73x Series only
• Raw data mode for most query-response protocols
• Built-in web server for easy configuration (HTTP)
• Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
• Allows automatic RS-485 direction control
• Tiny form-factor and low power consumption

Specifications

SELECTION GUIDE

Technical

tSH-700 Series Port Converter / Sharer Datasheet

Applications

• Factory, Building and Home Automation
• Accessing a Process Controller from Local Panel and Control Center
• Control Office Lightings from Two HMI Devices (Masters) in Different Places