(£423.60 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The I-7570 is a Serial to HART converter designed as the master device of HART protocol.
It allows users to access the HART slave by using RS-232 / RS-422 / RS-485. These HART slave devices may be a transmitter, actuator, current output device and so forth. In addition, by using the I-7570 utility tool, users can configure the module and test HART communication easily and quickly.
UTILITY Software provided to:
Supports HART Short / Long frame
Supports HART Burst mode
Supports point-to-point or multi-drop HART mode
Supports connecting up to 15 HART slave devices
Allows two HART masters
Provides utility tool for module configuration and HART communication
Provides PWR / TxD / RxD indication LED
Isolated COM 1: RS-232 / RS-422 / RS-485
4KV ESD Protection
Built-in Watchdog
Selectable 250Ω load resistor
( HART OPC Server : http://www.hartcomm.org/hcf/documents/documents_opc.html => for 30 day trial of the full licensed version )
(1) PACTware (PACTware)
(Free download: http://www.pactware.com/en/products/pactware.html)
(2) FieldCare (Endress+Hauser)
(Download: http://portal.endress.com/wa010/FieldCareDownloadGui/)
(3) PDM (Seimens)
(Download: http://support.automation.siemens.com/cn/llisapi.dll?func=cslib.csinfo&objid=35125986&lang=en&siteid=cseus&aktprim=0&objaction=csopen&extranet=standard&viewreg=CN)
|
UART Interface
|
|
|
COM 1
|
RS-232(Tx / Rx / GND) / RS-422 / RS-485
|
|
COM 1 Connector
|
9-pin screwed terminal block
|
|
Baud Rate (bps)
|
1200 bps (For FW_v1.1)
1200 ~ 115200bps (For FW_v1.1 / HW_v1.2) |
|
Data Format
|
O(odd parity), 8(data bit), 1(stop bit) (For FW_v1.1)
N/O/E(parity), 8(data bit), 1/2(stop bit) (For FW_v1.1 / HW_v1.2) |
|
HART Interface
|
|
|
HART Interface
|
2-pin screwed terminal block
|
|
HART Channel
|
1
|
|
LED
|
|
|
Round LED
|
PWR / TxD / RxD
|
|
Power
|
|
|
Power supply
|
Unregulated +10 ~ +30 VDC
|
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
|
Power Consumption
|
1 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail or Wall Mounting
|
|
Dimensions
|
121 mm x 72 mm x 35 mm (H x W x D)
|
|
Environment
|
|
|
Operating Temp.
|
-25 ? ~ +75 ? (-13 to 167 ?)
|
|
Storage Temp.
|
-30 ? ~ +85 ? (-22 to 185 ?)
|
|
Humidity
|
5% ~ 95%, non-condensing
|
The I-7570 is a Serial to HART converter designed as the master device of HART protocol.
It allows users to access the HART slave by using RS-232 / RS-422 / RS-485. These HART slave devices may be a transmitter, actuator, current output device and so forth. In addition, by using the I-7570 utility tool, users can configure the module and test HART communication easily and quickly.
UTILITY Software provided to:
|
UART Interface
|
|
|
COM 1
|
RS-232(Tx / Rx / GND) / RS-422 / RS-485
|
|
COM 1 Connector
|
9-pin screwed terminal block
|
|
Baud Rate (bps)
|
1200 bps (For FW_v1.1)
1200 ~ 115200bps (For FW_v1.1 / HW_v1.2) |
|
Data Format
|
O(odd parity), 8(data bit), 1(stop bit) (For FW_v1.1)
N/O/E(parity), 8(data bit), 1/2(stop bit) (For FW_v1.1 / HW_v1.2) |
|
HART Interface
|
|
|
HART Interface
|
2-pin screwed terminal block
|
|
HART Channel
|
1
|
|
LED
|
|
|
Round LED
|
PWR / TxD / RxD
|
|
Power
|
|
|
Power supply
|
Unregulated +10 ~ +30 VDC
|
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
|
Power Consumption
|
1 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail or Wall Mounting
|
|
Dimensions
|
121 mm x 72 mm x 35 mm (H x W x D)
|
|
Environment
|
|
|
Operating Temp.
|
-25 ? ~ +75 ? (-13 to 167 ?)
|
|
Storage Temp.
|
-30 ? ~ +85 ? (-22 to 185 ?)
|
|
Humidity
|
5% ~ 95%, non-condensing
|
