(£456.00 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The HRT-227CS is a HART to Fibre converter, which when paired can be used to extend HART communication distance via single mode fibre optic transmission. It has a built-in HART 250 Ω loop resistor, adjustable by dip switch. Therefore, users can make data collection and processing of HART network easier and quicker by applying HRT-227CS. In addition, we also provide the free HC_Tool utility for simple module configuration.
| LED Indicators | |
|---|---|
| Status | PWR, FB_Ack, FB_Err, HT_Err, HT_Tx and HT_Rx |
| COM Ports | |
|---|---|
| Ports | RS-232 (TXD / RXD / GND) for configuration (1200, O, 8 ,1) |
| Fiber | |
|---|---|
| Ports | SC Duplex type ; Single mode ; 100 Base-FX |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 |
| Wavelength | 1310 nm |
| TX Output |
-15 dBm Min. -8 dBm Max. |
| RX Sensitivity | -34 dBm Max. |
| RX Overload | -5 dBm Max. |
| Budget | 19 dBm |
| HART | |
|---|---|
| Ports | 1 |
| Data | Only Digital Data |
| Loop Resistor | Selectable 250 Ω loop resistor |
| Isolation | UL1577 Spec. |
| Protocol | 2-pin screwed terminal block (HART+, HART-) |
| Power | |
|---|---|
| Reverse Polarity Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Input Range | Unregulated +10 ~ +30 VDC |
| Consumption | 3W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 33.0 x 126 x 101 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C (-13 to 167ºF) |
| Storage Temperature | -30 ~ +80 °C (-22 to 176ºF) |
| Humidity | 10% ~ 90% RH, Non-condensing |
The HRT-227CS is a HART to Fibre converter, which when paired can be used to extend HART communication distance via single mode fibre optic transmission. It has a built-in HART 250 Ω loop resistor, adjustable by dip switch. Therefore, users can make data collection and processing of HART network easier and quicker by applying HRT-227CS. In addition, we also provide the free HC_Tool utility for simple module configuration.
| LED Indicators | |
|---|---|
| Status | PWR, FB_Ack, FB_Err, HT_Err, HT_Tx and HT_Rx |
| COM Ports | |
|---|---|
| Ports | RS-232 (TXD / RXD / GND) for configuration (1200, O, 8 ,1) |
| Fiber | |
|---|---|
| Ports | SC Duplex type ; Single mode ; 100 Base-FX |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 |
| Wavelength | 1310 nm |
| TX Output |
-15 dBm Min. -8 dBm Max. |
| RX Sensitivity | -34 dBm Max. |
| RX Overload | -5 dBm Max. |
| Budget | 19 dBm |
| HART | |
|---|---|
| Ports | 1 |
| Data | Only Digital Data |
| Loop Resistor | Selectable 250 Ω loop resistor |
| Isolation | UL1577 Spec. |
| Protocol | 2-pin screwed terminal block (HART+, HART-) |
| Power | |
|---|---|
| Reverse Polarity Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Input Range | Unregulated +10 ~ +30 VDC |
| Consumption | 3W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 33.0 x 126 x 101 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C (-13 to 167ºF) |
| Storage Temperature | -30 ~ +80 °C (-22 to 176ºF) |
| Humidity | 10% ~ 90% RH, Non-condensing |
