(£532.80 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The PDS-5105D-MTCP is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-5105D-MTCP into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-5105D-MTCP is able to meet the demands of every network-enabled application.
The PDS-5105D-MTCP includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-5105D-MTCP up in just one second and gives you fastest responses.
The PDS-5105D-MTCP also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
The PDS-5105D-MTCP is equipped with 1 RS-232/485 port and 9 RS-485 ports. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.
The PDS-5105D-MTCP is equipped with a 2-port 10/100Base-Tx Ethernet switch that simplifies network wiring by cascading Ethernet devices. Furthermore, the module features a LAN Bypass function. In cases where the module is offline due to of software, hardware or power failure, the LAN Bypass function will be automatically activated, and the essential communications on the network can continue operating without interruption.
| CPU Module | |
|---|---|
| CPU | 80186 or compatible (16-bit and 80 MHz) |
| EEPROM | 16 KB |
| Flash | 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles. |
| SRAM | 512 KB |
| LED Indicators | |
|---|---|
| Status |
1 x Power 2 x Ethernet 5 x digit 7 Segment |
| COM Ports | |
|---|---|
| Ports |
1 x 3-wire RS-232/RS-485 9 x RS-485 |
| Baud Rate | 115200 bps Max. @ 10 Ports, half-duplex, 80% loading |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Odd, Even, Mark, Space |
| Data Bit |
7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM10 |
| Stop Bit | 1, 2 |
| Node Address | 254 (max.) |
| Ethernet | |
|---|---|
| Ports |
2-Port 10/100 Base-TX Ethernet Switch with LAN Bypass, RJ-45 x 2 (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Consumption | 0.18 A @ 24 VDC |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
|---|---|
| Casing | Fire Retardant Materials (UL94-V0 Level) |
| Dimensions (mm) | 91 mm x 52 mm x 131 mm (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
The PDS-5105D-MTCP is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-5105D-MTCP into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-5105D-MTCP is able to meet the demands of every network-enabled application.
The PDS-5105D-MTCP includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-5105D-MTCP up in just one second and gives you fastest responses.
The PDS-5105D-MTCP also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
The PDS-5105D-MTCP is equipped with 1 RS-232/485 port and 9 RS-485 ports. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.
The PDS-5105D-MTCP is equipped with a 2-port 10/100Base-Tx Ethernet switch that simplifies network wiring by cascading Ethernet devices. Furthermore, the module features a LAN Bypass function. In cases where the module is offline due to of software, hardware or power failure, the LAN Bypass function will be automatically activated, and the essential communications on the network can continue operating without interruption.
| CPU Module | |
|---|---|
| CPU | 80186 or compatible (16-bit and 80 MHz) |
| EEPROM | 16 KB |
| Flash | 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles. |
| SRAM | 512 KB |
| LED Indicators | |
|---|---|
| Status |
1 x Power 2 x Ethernet 5 x digit 7 Segment |
| COM Ports | |
|---|---|
| Ports |
1 x 3-wire RS-232/RS-485 9 x RS-485 |
| Baud Rate | 115200 bps Max. @ 10 Ports, half-duplex, 80% loading |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Odd, Even, Mark, Space |
| Data Bit |
7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM10 |
| Stop Bit | 1, 2 |
| Node Address | 254 (max.) |
| Ethernet | |
|---|---|
| Ports |
2-Port 10/100 Base-TX Ethernet Switch with LAN Bypass, RJ-45 x 2 (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Consumption | 0.18 A @ 24 VDC |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
|---|---|
| Casing | Fire Retardant Materials (UL94-V0 Level) |
| Dimensions (mm) | 91 mm x 52 mm x 131 mm (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
