(£328.80 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The iNS-306 is 6-Port IoT Switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the iNS-306 switch enables centralization of the power supply, providing up to 30 watts. The iNS-306 can be used to power IEEE 802.3af/at standard devices (PD).
With a simple and friendly UI, the user can manage the power supply status of the PoE device through the web page remotely.
It also supports the power scheduling function, so that the device will automatically turn off the power when it is not needed for energy saving purposes.
The PoE powered devices may become slow or inoperable if they are left on for too long. A simple reset can help you to solve most problems. The iNS-306 offers an individual power reset schedule for each PoE port, you can configure the schedule through a web browser to reset your devices regularly and keep them working in good condition.
Both power inputs can be connected simultaneously to live DC power sources. If one power source fails, the other live source will act as a backup, and automatically supplies all of iNS-306 power needs.
If operating at high loading (total PoE Loading over 60w), it is suggested to use a dual input power supply.
Supports Daisy chain technology, so when power to the iNS-306 fails, Port 5 & Port 6 will still pass the Ethernet signal ensure the transmission of important data.
| LED Indicators | |
|---|---|
| Status | PWR1, PWR2, POE, Link/Act, Speed |
| Ethernet | |
|---|---|
| Ports | 6 x RJ-45, 10/100Base-TX |
| Standards |
IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward; wire speed switching |
| MAC Table | 16K |
| Frame Buffer Memory | 4Mbit |
| Isolation | 1500 Vrms 1 minute |
| DIP Switch | Init |
| PoE Technology | |
|---|---|
| PoE Compliance | 100% IEEE 802.3at compliant |
| PoE Power | Up to 30 watts per channel |
| PoE Operation | Automatic detection and power management |
| PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
| PoE Disconnect Mode | DC disconnect |
| PoE Voltage | +52 VDC |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +57 VDC Redundant dual Input |
| Redundant Power Inputs | Yes |
| Consumption |
0.15 A @ 24 VDC without PD loading, 6A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDC without PD loading, 3A @ 48VDC with PD full loading (30W per ports) |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) |
DIN-rail mounting: 28 x 160 x 119 (W x L x H) Wall mounting: 28 x 199 x 112 (W x L x H) |
| Installation | DIN-rail mounting or wall mounting (optional) |
| Environment | |
|---|---|
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
The iNS-306 is 6-Port IoT Switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the iNS-306 switch enables centralization of the power supply, providing up to 30 watts. The iNS-306 can be used to power IEEE 802.3af/at standard devices (PD).
With a simple and friendly UI, the user can manage the power supply status of the PoE device through the web page remotely.
It also supports the power scheduling function, so that the device will automatically turn off the power when it is not needed for energy saving purposes.
The PoE powered devices may become slow or inoperable if they are left on for too long. A simple reset can help you to solve most problems. The iNS-306 offers an individual power reset schedule for each PoE port, you can configure the schedule through a web browser to reset your devices regularly and keep them working in good condition.
Both power inputs can be connected simultaneously to live DC power sources. If one power source fails, the other live source will act as a backup, and automatically supplies all of iNS-306 power needs.
If operating at high loading (total PoE Loading over 60w), it is suggested to use a dual input power supply.
Supports Daisy chain technology, so when power to the iNS-306 fails, Port 5 & Port 6 will still pass the Ethernet signal ensure the transmission of important data.
| LED Indicators | |
|---|---|
| Status | PWR1, PWR2, POE, Link/Act, Speed |
| Ethernet | |
|---|---|
| Ports | 6 x RJ-45, 10/100Base-TX |
| Standards |
IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward; wire speed switching |
| MAC Table | 16K |
| Frame Buffer Memory | 4Mbit |
| Isolation | 1500 Vrms 1 minute |
| DIP Switch | Init |
| PoE Technology | |
|---|---|
| PoE Compliance | 100% IEEE 802.3at compliant |
| PoE Power | Up to 30 watts per channel |
| PoE Operation | Automatic detection and power management |
| PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
| PoE Disconnect Mode | DC disconnect |
| PoE Voltage | +52 VDC |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +57 VDC Redundant dual Input |
| Redundant Power Inputs | Yes |
| Consumption |
0.15 A @ 24 VDC without PD loading, 6A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDC without PD loading, 3A @ 48VDC with PD full loading (30W per ports) |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) |
DIN-rail mounting: 28 x 160 x 119 (W x L x H) Wall mounting: 28 x 199 x 112 (W x L x H) |
| Installation | DIN-rail mounting or wall mounting (optional) |
| Environment | |
|---|---|
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
