I-7565 USB To CAN Bus Converter

Description

The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. Nowadays the interface is present in every new PC and is supported by the MS-Windows 98, Me, 2000,XP, Windows 7 & Windows 10 operating systems.

If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module lets you to communicate with CAN devices easily from a PC with a USB interface.

Features

3000V isolation on CAN side
The CAN port of I-7565 has 3000V isolation. This isolation can protect the local RS-232 devices from damaging signals coming from the CAN network.

Watchdog inside
The I-7565 Watchdog has a hardware reset circuit to monitor the I-7565's operation status. When working in harsh or noisy environments, the I-7565 may be affected by the external signal. The circuit will help the I-7565 to continue to operate.

Power and Error indicator display
There are two indicators on the I-7565.The power indicator can help user to check whether the I-7565 is in standby or is transmitting/receiving messages. The Error indicator will be turned on when any errors occur on the I-7565.

• RoHs Design
• Fully compliant with USB 1.1/2.0(Full Speed)
• Fully compatible with the ISO 11898-2 standard
• No external power supply is required as the I-7565 takes it's power from the USB bus
• Microprocessor inside with 20MHz
• 82C250 CAN transceiver
• Built-in converter firmware
• Transmission speed up to 1M bps for CAN and 921.6K bps for USB
• Software configurable CAN and USB communication parameters
• Max transmission distance over 1000 m (follow CAN specification)
• Support both CAN 2.0A and CAN 2.0B
• Built-in jumper to select 120 ohm terminal resister
• Mount easily on DIN-rail
• Power, data flow and error indicator for CAN and USB
• Watchdog inside
• Windows 98/ME/2000/XP/7/10 drivers supported
• Linux driver supported?
• Free DLL for VC++, VB, and BCB

Specifications

• USB interface connector: USB Type B
• CAN interface connector: D-Sub, 9-pin
• Isolation voltage: 3000Vrms on the CAN side
• Accessories: One USB Type A to Type B cable
• Dimensions: 108mm x 72mm x 35mm
• Operation temperature:-25 to + 75 (degree C)
• Storage temperature: -40 to +80 (degree C)
• Repeater request: over than 1000m (suggestion)
• Power consumption: 1W max
• Communication speed:
  921.6K bps fixed for USB
  1M bps max for CAN

Technical

Quickstart Guide
User Manual