(£271.20 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
I-7565-DNM can represent an economic solution for a DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is "Predefined Master-Slave connection Set". I-7565-DNM supports Group 2 only Server and UCMM functions to communicate with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications. Besides, I-7565-DNM uses the CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example WinXP/Win7/Win10. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, I-7565-DNM is developed for this purpose.
| Software | |
|---|---|
| Driver | Win XP/ Win7/ Win8/ Win10 32-bit and 64-bit , Linux driver |
| SDK | x64 DLL, .NET DLL, VB6 bas, VC6 DLL, BCB6 DLL |
| CPU Module | |
|---|---|
| CPU | x86 |
| LED Indicators | |
|---|---|
| Status | PWR LED, RUN LED, NS LED, MS LED |
| USB | |
|---|---|
| Specification | USB 1.1 and USB 2.0 |
| Transfer Speed | 921.6 kbps |
| Connector | USB Type B |
| DeviceNet | |
|---|---|
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 1 |
| Baud Rate | 125 k, 250 k, 500 k |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 |
| CAN Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Power | |
|---|---|
| Consumption | 3 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 72 x 101 x 33 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
I-7565-DNM can represent an economic solution for a DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is "Predefined Master-Slave connection Set". I-7565-DNM supports Group 2 only Server and UCMM functions to communicate with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications. Besides, I-7565-DNM uses the CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example WinXP/Win7/Win10. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, I-7565-DNM is developed for this purpose.
| Software | |
|---|---|
| Driver | Win XP/ Win7/ Win8/ Win10 32-bit and 64-bit , Linux driver |
| SDK | x64 DLL, .NET DLL, VB6 bas, VC6 DLL, BCB6 DLL |
| CPU Module | |
|---|---|
| CPU | x86 |
| LED Indicators | |
|---|---|
| Status | PWR LED, RUN LED, NS LED, MS LED |
| USB | |
|---|---|
| Specification | USB 1.1 and USB 2.0 |
| Transfer Speed | 921.6 kbps |
| Connector | USB Type B |
| DeviceNet | |
|---|---|
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 1 |
| Baud Rate | 125 k, 250 k, 500 k |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 |
| CAN Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Power | |
|---|---|
| Consumption | 3 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 72 x 101 x 33 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
