This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

I-7540D-MTCP Modbus/Ethernet To CAN Bus Gateway

I-7540D-MTCP Modbus/Ethernet to CAN bus Gateway
£26600

(£319.20 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:I-7540D-MTCP

Description

The I-7540D-MTCP is a device designed for exchanging data between Modbus devices and CAN devices. I-7540D-MTCP is a Modbus TCP server and acts as slave device in Modbus RTU network. It supports four communication modes: Modbus TCP, Modbus RTU, CAN-Ethernet Convert and Pair connection.


The major function of the I-7540D-MTCP is as a CAN to Modbus TCP/RTU gateway. It allows Modbus TCP/RTU devices to communicate with CAN devices on a CAN network. I-7540D-MTCP supports the function codes 0x03/0x04/0x10 of Modbus TCP/RTU for reading and writing CAN messages.


The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. It can also be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). 

Features

 

  • 80186-80 Embedded CPU, or compatible
  • Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
  • COM driver support interrupt & 1K QUEUE Input & Output buffer
  • Provide 200 CAN frames buffer in CAN to Modbus Mode
  • NXP 82C 250 CAN Transceiver
  • Support both CAN specification 2.0A and 2.0B
  • Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
  • Max transmission distance of CAN over 1000m (follow CAN specification)
  • 7-segment LED display to Module IP, RS-232 baud rate, CAN configuration…
  • CAN Error/Tx/Rx LED indicator
  • Software configurable CAN and RS-232 communication parameters
  • Firmware updated from COM1 or Ethernet port
  • Support Web Configuration
  • Support maximum 24 Ethernet clients connection
  • Support function code 0x03/0x04/0x10 of Modbus TCP/RTU command for reading and writing CAN message
  • Provide the transparent communication between the CAN devices via Ethernet
  • Support 30 specific CAN IDs in the Modbus TCP/RTU mode

Specifications

 

CAN Interface

Controller

NXP SJA1000T with 16 MHz clock

Transceiver

NXP 82C250

Channel number

1

Connector

2-pin screwed terminal block (CAN_L, CAN_H)

Baud Rate (bps)

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)

Isolation

1000 VDC for DC-to-DC, 2500 Vrms for photocoupler

Terminator Resistor

Jumper for 120 Ω terminator resistor

Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

UART Interface

COM 1

RS-232

COM 1 Connector

5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )

COM 2

RS-485 (Self-turner inside)

COM 2 Connector

2-pin screwed terminal block (DATA+, DATA-)

Baud Rate (bps)

110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Data bit

7, 8

Stop bit

1

Parity

None, Even, Odd

Ethernet Interface

Controller

10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)

Connector

RJ-45 with LED indicator

Power

Power supply

Unregulated +10 ~ +30 VDC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

2.5 W

Mechanism

Installation

DIN-Rail

Dimensions

72mm x 122mm x 33mm (W x L x H)

Environment

Operating Temp.

-25 ~ 75 ?

Storage Temp.

-30 ~ 80 ?

Humidity

10 ~ 90% RH, non-condensing

 

Description

The I-7540D-MTCP is a device designed for exchanging data between Modbus devices and CAN devices. I-7540D-MTCP is a Modbus TCP server and acts as slave device in Modbus RTU network. It supports four communication modes: Modbus TCP, Modbus RTU, CAN-Ethernet Convert and Pair connection.


The major function of the I-7540D-MTCP is as a CAN to Modbus TCP/RTU gateway. It allows Modbus TCP/RTU devices to communicate with CAN devices on a CAN network. I-7540D-MTCP supports the function codes 0x03/0x04/0x10 of Modbus TCP/RTU for reading and writing CAN messages.


The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. It can also be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). 

Features

 

Specifications

 

CAN Interface

Controller

NXP SJA1000T with 16 MHz clock

Transceiver

NXP 82C250

Channel number

1

Connector

2-pin screwed terminal block (CAN_L, CAN_H)

Baud Rate (bps)

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)

Isolation

1000 VDC for DC-to-DC, 2500 Vrms for photocoupler

Terminator Resistor

Jumper for 120 Ω terminator resistor

Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

UART Interface

COM 1

RS-232

COM 1 Connector

5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )

COM 2

RS-485 (Self-turner inside)

COM 2 Connector

2-pin screwed terminal block (DATA+, DATA-)

Baud Rate (bps)

110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Data bit

7, 8

Stop bit

1

Parity

None, Even, Odd

Ethernet Interface

Controller

10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)

Connector

RJ-45 with LED indicator

Power

Power supply

Unregulated +10 ~ +30 VDC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

2.5 W

Mechanism

Installation

DIN-Rail

Dimensions

72mm x 122mm x 33mm (W x L x H)

Environment

Operating Temp.

-25 ~ 75 ?

Storage Temp.

-30 ~ 80 ?

Humidity

10 ~ 90% RH, non-condensing

 

Technical

I-7540D-MTCP Modbus Ethernet to CAN Gateway Datasheet

Recently Viewed Products