To give you the best experience we use cookies. Learn More

OK

100% Guarantee
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

I-7530-FT RS232 To CAN Low Speed Fault Tolerant Bus Converter

I-7530-FT RS232 to CAN Low Speed Fault tolerant Bus Converter
£19500

(£234.00 incl VAT)
FREE delivery to UK on orders over £500

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:I-7530-FT

Description

I-7530-FT is a RS-232/CAN low speed fault tolerant converter and can accurately convert messages between CAN and RS-232 communication media. It can resist more noise in harsh environment, and even access CAN messages with single line of CAN bus. In order to use the CAN network with traditional programmable RS-232 devices, we provide an easy way to achieve this purpose by several of user function call. It can be used in the application of CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.

Features

  • Compatible with CAN specification 2.0A and 2.0B
  • Fully compatible with ISO 11898-3 standard (low speed fault tolerance) 
  • Support various baud rate from 10K bps to 1M bps
  • Software configurable CAN and RS-232 communication parameters
  • Power, data flow and error indicator for CAN and RS-232
  • Watchdog inside
  • Support transparent communication mode
  • 1000 frames in CAN received buffer and 900 frames in RS-232 received buffer
  • Full-duplex communication mode of RS-232 devices is not supported

Specifications

Item
I-7530
I-7530-FT
Hardware
EEPROM
2 KB (for system information), 100,000 erase/write cycles
CAN Interface
Transceiver
NXP 82C250
AMIS 41682
Channel number
1
Connector
9-pin male D-Sub (CAN_L, CAN_H, N/A for others)
Baud Rate (bps)
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
(allow user-defined CAN baud rate)
10 k, 20 k, 50 k, 125 k (allow user-defined CAN baud rate)
Isolation
3000 VDC for DC-to-DC,
2500 Vrms for photo-couple
NONE
Terminal Resistor
Selectable 120Ω terminal resistor by jumper
1 kΩ for CAN_H and CAN_L
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
ISO-11898-3 (low speed fault tolerance), CAN 2.0A and CAN 2.0B
Receive Buffer
1000 data frames
RS-232 Interface
Connector
9-pin female D-Sub (TxD, RxD, GND, N/A for others )
Baud Rate (bps)
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
Data bit
5, 6, 7, 8
Stop bit
1, 2
Parity bit
None, Even, Odd
Receive Buffer
900 data frames
LED
Round LED
ON LED: Power and Data Flow; ERR LED: Error Status
Power
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
1 W
Mechanism
Installation
DIN-Rail
Dimensions
72mm x 118mm x 33mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
 

 

Description

I-7530-FT is a RS-232/CAN low speed fault tolerant converter and can accurately convert messages between CAN and RS-232 communication media. It can resist more noise in harsh environment, and even access CAN messages with single line of CAN bus. In order to use the CAN network with traditional programmable RS-232 devices, we provide an easy way to achieve this purpose by several of user function call. It can be used in the application of CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.

Features

Specifications

Item
I-7530
I-7530-FT
Hardware
EEPROM
2 KB (for system information), 100,000 erase/write cycles
CAN Interface
Transceiver
NXP 82C250
AMIS 41682
Channel number
1
Connector
9-pin male D-Sub (CAN_L, CAN_H, N/A for others)
Baud Rate (bps)
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
(allow user-defined CAN baud rate)
10 k, 20 k, 50 k, 125 k (allow user-defined CAN baud rate)
Isolation
3000 VDC for DC-to-DC,
2500 Vrms for photo-couple
NONE
Terminal Resistor
Selectable 120Ω terminal resistor by jumper
1 kΩ for CAN_H and CAN_L
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
ISO-11898-3 (low speed fault tolerance), CAN 2.0A and CAN 2.0B
Receive Buffer
1000 data frames
RS-232 Interface
Connector
9-pin female D-Sub (TxD, RxD, GND, N/A for others )
Baud Rate (bps)
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
Data bit
5, 6, 7, 8
Stop bit
1, 2
Parity bit
None, Even, Odd
Receive Buffer
900 data frames
LED
Round LED
ON LED: Power and Data Flow; ERR LED: Error Status
Power
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
1 W
Mechanism
Installation
DIN-Rail
Dimensions
72mm x 118mm x 33mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
 

 

Technical

I-7530-FT Serial-CAN Low speed Fault tolerant converter datasheet

Recently Viewed Products