This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

GW-7433D Modbus TCP Server/RTU Slave To CANopen Master Gateway

GW-7433D Modbus TCP server/RTU slave to CANopen master gateway
£28600

(£343.20 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:GW-7433D

Description

The GW-7433D is a solution that provides a communication transformation between CANopen protocol and Modbus/TCP & RTU protocol. It solves a mission-critical problem, and connecting an existed CANopen network with Ethernet-base master device as long as this master device supports Modbus/TCP protocol. It enables CANopen networks to be coupled together with the Internet/Ethernet, whereby remote monitoring and controlling is achieved.

For CANopen network, the GW-7433D is a CANopen master device. It supports PDO and SDO functions to communicate with slave devices. From the view of Modbus TCP & RTU network, GW-7433D plays a Modbus TCP server or Modbus RTU slave role. It can receive the commands from Modbus TCP client or Modbus RTU master, and process the commands to reply or send the related CANopen data. We provide utility software for users to configure the parameters of CANopen slaves to GW-7433D. When GW-7433D boots up, it will collect the necessary information from all slaves which are predefined in the GW-7433D by using utility. 

 

 

Features

  • Follow the CiA CANopen Standard DS-301 v4.02
  • Support Modbus RTU for COM1(RS-232) and COM2(RS-485)
  • Allow Max 5 Modbus TCP clients to access GW-7433D simultaneously
  • Provide listen mode. The function can let the GW-7433D monitor the CANopen slave data without bothering the CANopen network
  • Support Node Guarding and Heartbeat Consumer protocol
  • Support more than 120 CANopen SDO/PDO commands
  • Support 4 data types: Boolean?Byte?Word?Double Word (4-byte)
  • Provide the cyclic mode and command mode for RxPDO
  • Provide the CANopen disconnection detection
  • On-line add/remove CANopen slaves
  • Allow to get the CAN status by Modbus commands
  • Allow to get the communication states of the CANopen slave and GW-7433D by Modbus commands
  • Allow to reset CANopen slaves by Modbus commands
  • Support 3072 DI channels, 3072 DO channels, 640 AI channels, and 640 AO channels

Specifications

 

Hardware
Watchdog
Watchdog IC
CAN Interface
Controller
NXP SJA1000T with 16 MHz clock
Transceiver
NXP 82C250
Connector
5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Isolation
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Protocol
CANopen DS-301 ver4.02, DS-401 ver2.1
UART Interface
COM 1
RS-232
COM 1 Connector
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
COM 2
RS-485 (Self-turner inside)
COM 2 Connector
2-pin screwed terminal block (DATA+, DATA-)
Protocol
Modbus RTU
Ethernet Interface
Controller
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Connector
RJ-45 with LED indicator
Protocol
Modbus TCP
Power
Power supply
Unregulated +10 ~ +30 VDC
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
2.5 W
Mechanism
Dimensions
72mm x 33mm x 122mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ?
Storage Temp.
-30 ~ 80 ?
Humidity
10 ~ 90% RH, non-condensing

Applications

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition 

Description

The GW-7433D is a solution that provides a communication transformation between CANopen protocol and Modbus/TCP & RTU protocol. It solves a mission-critical problem, and connecting an existed CANopen network with Ethernet-base master device as long as this master device supports Modbus/TCP protocol. It enables CANopen networks to be coupled together with the Internet/Ethernet, whereby remote monitoring and controlling is achieved.

For CANopen network, the GW-7433D is a CANopen master device. It supports PDO and SDO functions to communicate with slave devices. From the view of Modbus TCP & RTU network, GW-7433D plays a Modbus TCP server or Modbus RTU slave role. It can receive the commands from Modbus TCP client or Modbus RTU master, and process the commands to reply or send the related CANopen data. We provide utility software for users to configure the parameters of CANopen slaves to GW-7433D. When GW-7433D boots up, it will collect the necessary information from all slaves which are predefined in the GW-7433D by using utility. 

 

 

Features

Specifications

 

Hardware
Watchdog
Watchdog IC
CAN Interface
Controller
NXP SJA1000T with 16 MHz clock
Transceiver
NXP 82C250
Connector
5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Isolation
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Protocol
CANopen DS-301 ver4.02, DS-401 ver2.1
UART Interface
COM 1
RS-232
COM 1 Connector
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
COM 2
RS-485 (Self-turner inside)
COM 2 Connector
2-pin screwed terminal block (DATA+, DATA-)
Protocol
Modbus RTU
Ethernet Interface
Controller
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Connector
RJ-45 with LED indicator
Protocol
Modbus TCP
Power
Power supply
Unregulated +10 ~ +30 VDC
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
2.5 W
Mechanism
Dimensions
72mm x 33mm x 122mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ?
Storage Temp.
-30 ~ 80 ?
Humidity
10 ~ 90% RH, non-condensing

Applications

Recently Viewed Products