INet-601 InstruNet Isolated 8diff/16se Analog Input, 4 DIO USB Data Acquisition Unit

Description

Stand-alone Isolated USB Data Acquisition Unit, with 8 Differential or 16 Single-ended Analog inputs, with 4 Digital I/O channels. The InstruNet 600 series have a 24-bit ADC and can be configured for multiple sensor types. InstruNet World software supplied, while additional options are InstruNet World Plus, Labview & Dasylab. Free User Libraries are also provided to allow creation of custom applications.

Features

• The i600/i601 USB Data Acquisition device connects Windows computer to sensors and controls via analog inputs, digital inputs and digital outputs.
• The i601 product provides ±36V bank electrical isolation; whereas the less costly i600 connects I/O signal ground to computer ground. i60x receives power from USB bus.
• 16se/8di Voltage Input Channels with extremely accurate 24-bit A/D Converter
• 4x Digital I/O (4mA sink/source, 0 to 3.3V)
• Connect Directly To Sensors:Voltage, Thermocouple,Thermistor,RTD,Load Cell,Strain Gauge,Potentiometer,Current,Resistance

Specifications

• This A/D module provides 16se/8di voltage input channels (Ch#1...#16) , each of which are independently software programmable with Windows software that support the direct connection to many common sensor types
• Voltage input range on each channel is independently software programmable to one of: ±20mV, ±40mV, ±80mV, ±150mV, ±300mV, ±600mV, ±1.2V, ±2.5V, ±5V, ±10V
• Included is a mating Hd44 Female Connector & Cover. Alternatively, one can attach i600/i601 to the following optional wiring boxes:i510, i511, i512. If one is working with thermocouples, an i510 wiring box is required due to it’s internal cold junction compensation.
• i600 and i601 are stand-alone USB data acquisition systems. No additional components, such as external power supply, are required. Included in the box: i60x Hardware Device, USB Cable, Software on CD, Mating Hd44 Female Connector & Hd44 Cover. For details, see the i60x Installation Guide.
• Digitize at a maximum sample rate of 160K sample/sec for 1 channel, 12Ks/sec/ch for 2 channels, 6Ks/sec/ch for 4 channels, and 3Ks/sec/ch for 8 channels. For more details, see Voltage Accuracy.
• Each channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0 ... 100mSec) , Sample-Rate (samples-per-second-per-channel), Digital IIR Filter (LowPass, HighPass, BandPass, or BandStop) , Voltage Measurement Range (±20mV...±10V), Sensor Type, and Single-Ended or Differential Wiring
• Excitation power (+3.3V ±0.2V, <80mA, 28mA per sensor max) is provided for sensors, along with other End User Power voltages. This 3.3V, which is referenced to instruNet Ground, is automatically readback by A/D when calculating sensor values.
• The 4mA sink/source digital I/O port consists of 4 individual TTL-compatible lines (Ch#25...#28), each of which can be configured as: input or output bit. When configured as an input, a channel can be used to sense a digital high (2 to 5.5 Volts) or digital low (0V to 0.8Volts). When configured as an output, a channel can be set high (e.g. >2V) or low (e.g. <0.8V). These I/O pins are short-circuit protected against high voltages up to 6.0V and down to -6.0V.

Technical

Datasheet