HOME>Data Acquisition Solutions>PCI and PCIExpress Data Acquisition>PCI Bus D/A, A/D Cards>PIO-DA16U 16Ch., 14-bit Analog Output Board (Universal PCI)

PIO-DA16U 16Ch., 14-bit Analog Output Board (Universal PCI)

£54100

(£649.20 incl VAT)
FREE delivery to UK on orders over £500

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:PIO-DA16U

Description

The PIO-DA series are multi-channel D/A boards for the PCI bus for PC. The PIO-DA16/8/4/16U offer 16/8/4 channels double-buffered analog output. The output range may be configured in range: ±10V voltage output or 0~20mA current loop sink. The innovative designed improves several drawbacks of the conventional D/A boards. For examples: 1. Jumperless and without trim-pot. 2. The calibration is performed under software control eliminating manual trim-pot adjustments. The calibration data is stored in EEPROM. 3. Each channel can be selected as voltage or current output. 4. High channel count output can be implemented in half size.

The PIO-DA16U Universal PCI card supports both 5V and 3.3V, while the PIO-DA16/DA8/DA4 PCI card supports 5V PCI bus only. The PIO-DA16U (Universal PCI Version) is fully compatible with the PIO-DA16 (PCI Version), and also has an improvement in D/I pull-high/low design. The PIO-DA16U cards are designed as direct replacements to the PIO-DA16 cards for RoHS reason.

Note: This card needs a +12V power supply, which can be found in most regular PC's or Industrial PC's.

Includes one CA-4002 D-Sub connector.

Features

PCI bus interface for PIO-DA16/DA8/DA4
Universal PCI interface, supports both +5V and +3.3V PCI bus for PIO-DA16U
Digital input port can be set to pull-high or pull-low for PIO-DA16U
16/8/4 channels, 14-bit analog output
Voltage output range ±10V
0~20mA current sink to ground for each converter
Two pacer timer interrupt source
Double-buffered D/A latches
Software calibration
16-channel DI, 16-channel DO
SMD, short card
One 37-pin D-Sub female connector, two 20-pin flat cable connectors
Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR
No base address or IRQ jumper need to set

Software

Toolkit for DOS
Toolkit for Windows 95/98
Toolkit for Windows NT
Toolkit for Windows 2000
Toolkit for Windows XP/2003/Vista 32-bit
LabVIEW toolkit for Windows

Toolkit for OCX 95/98
Toolkit for OCX NT
Toolkit for OCX 2000
Toolkit for OCX XP/2003/Vista 32-bit
Driver for DasyLab
Driver for LINUX

Specifications

Analog Output Specifications

D/A Converter : Quad 14-bit MDAC
Channels: 16/8/4 Independant (depending on whether PIO-DA16,DA8 or DA4 boards)
Resolution : 14-bit
Type: double-buffered, multiplying
Integral linearity : 0.006% FSR (typical)
Differential linearity : 0.006% FSR (typical)
Voltage output : Range : +10V ~ -10V
Current Drive : ±5mA
Absolute Accuracy : 0.01% FSR (typical)
Current output : Range : 0 ~ 20mA
Absolute Accuracy : 0.1% FSR (typical)
Excitation Voltage Range : +7V to +40V

Digital I/O

Input : 16-channel TTL levels
Low : V_IL = 0.8V max., I_IL = -0.4mA max
High : V_IH= 2.4V min., I_IH = 20µA max
Output : 16-channel TTL levels
Low : V_OL = 0.8V max., I_OL = 8mA max
High : V_OH= 2.4V min., I_OH = 0.4mA max

General

Interface : PIO-DA16/DA4/DA8 is PCI Bus, PIO-DA16U is Universal PCI
Power Requirements : PIO-DA16 : +5V@1400mA(Max.)
PIO-DA16U : +5V@1400mA(Max.)
PIO-DA4 : +5V@600mA(Max.)
PIO-DA8 : +5V@800mA(Max.)
Operating temperature : 0~50°C
Storage temperature : -20~70°C
Humidity : 0~90% RH, non-condensing
Dimensions : 180mm x 115mm

Technical

PCI Analog Output Boards (Datasheet)