(£178.80 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter" modes.
The mode combinations can be individual set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder input” mode.
The built-in digital filter can filter out noise where the high/ low pulse width is smaller than the minimum high/low width of the digital filter. The M-7084 provides a virtual battery backup function in counter mode.
SYSTEM SPECIFICATIONS
| Communication | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200 bps |
| Protocol | Modbus RTU, DCON |
| Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
| LED Indicator | |
| Power | 1 LED, Red |
| Isolation | |
| Intra-module Isolation, Field-to-Logic | 3000 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | +/-4 kV Contact for Each Terminal |
| EFT (IEC 61000-4-4) | +/-4 kV for Power |
| Surge (IEC 61000-4-5) | +/-3 kV for Power Line |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 10 ~ 30 VDC |
| Consumption | 1.32 W Max. |
| Mechanical | |
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm |
| Installation | DIN-Rail or Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
I/O SPECIFICATIONS
|
|||||||||||||||||||||||||||||||||
| Note1: | |||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
Counter Measurement, Frequency Measurement and Encoder Motion Control.
The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter" modes.
The mode combinations can be individual set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder input” mode.
The built-in digital filter can filter out noise where the high/ low pulse width is smaller than the minimum high/low width of the digital filter. The M-7084 provides a virtual battery backup function in counter mode.
SYSTEM SPECIFICATIONS
| Communication | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200 bps |
| Protocol | Modbus RTU, DCON |
| Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
| LED Indicator | |
| Power | 1 LED, Red |
| Isolation | |
| Intra-module Isolation, Field-to-Logic | 3000 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | +/-4 kV Contact for Each Terminal |
| EFT (IEC 61000-4-4) | +/-4 kV for Power |
| Surge (IEC 61000-4-5) | +/-3 kV for Power Line |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 10 ~ 30 VDC |
| Consumption | 1.32 W Max. |
| Mechanical | |
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm |
| Installation | DIN-Rail or Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
I/O SPECIFICATIONS
|
|||||||||||||||||||||||||||||||||
| Note1: | |||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
Counter Measurement, Frequency Measurement and Encoder Motion Control.
