This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

USB-234 16-Bit, 100 KS/s, Multifunction DAQ Device With 2 Analog Outputs

USB-234 16-Bit, 100 kS/s, Multifunction DAQ Device with 2 Analog Outputs
£42500

(£510.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:USB-234
Delivery to UK Only

Description

USB-234 device provides improved cost/performance compared to our similarly priced 16-bit DAQ devices. The USB-234 offers eight analog inputs, two analog outputs, eight DIO channels, and one counter input.

Analog Input
The USB-234 provides four differential (DIFF)/eight 16-bit single-ended (SE) analog inputs with a fixed analog input range of ±10 V.

Sample Rate
The maximum continuous sample rate is an aggregate rate for USB-234, up to 100 kS/s.

Analog Output
The USB-234 provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.

Digital I/O
Eight TTL-level digital I/O lines are included with the USB-234. Each digital channel is software-selectable for input or output.

Digital input voltage ranges from 0 V to 5 V are permitted, with thresholds of 0.8 V (low) and 2.3 V (high).

When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of V4 mA.

All DIO lines are set to high-impedance inputs at system startup and reset. The device does not drive the signal high or low. Each line has a weak pull-down resistor connected to it.

All digital I/O updates and samples are software-paced.

Digital Trigger Input
The USB-234 includes an external digital trigger input that is software-selectable for rising edge or falling edge detection.

Counter Input
The USB-234 supports one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.

 

Features

8 SE/4 DIFF analog inputs

±10 V input range

50 kS/s sample rate

8 digital I/O, individually-configurable

One 32-bit counter input

Two 16-bit analog outputs

No external power required

Micro-USB Type B connector

Specifications

Product Specifications

Technical

Product Manual

Description

USB-234 device provides improved cost/performance compared to our similarly priced 16-bit DAQ devices. The USB-234 offers eight analog inputs, two analog outputs, eight DIO channels, and one counter input.

Analog Input
The USB-234 provides four differential (DIFF)/eight 16-bit single-ended (SE) analog inputs with a fixed analog input range of ±10 V.

Sample Rate
The maximum continuous sample rate is an aggregate rate for USB-234, up to 100 kS/s.

Analog Output
The USB-234 provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.

Digital I/O
Eight TTL-level digital I/O lines are included with the USB-234. Each digital channel is software-selectable for input or output.

Digital input voltage ranges from 0 V to 5 V are permitted, with thresholds of 0.8 V (low) and 2.3 V (high).

When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of V4 mA.

All DIO lines are set to high-impedance inputs at system startup and reset. The device does not drive the signal high or low. Each line has a weak pull-down resistor connected to it.

All digital I/O updates and samples are software-paced.

Digital Trigger Input
The USB-234 includes an external digital trigger input that is software-selectable for rising edge or falling edge detection.

Counter Input
The USB-234 supports one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.

 

Features

8 SE/4 DIFF analog inputs

±10 V input range

50 kS/s sample rate

8 digital I/O, individually-configurable

One 32-bit counter input

Two 16-bit analog outputs

No external power required

Micro-USB Type B connector

Specifications

Product Specifications

Technical

Product Manual

Recently Viewed Products