This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

USB-231-OEM 16-Bit, 50 KS/s, Multifunction DAQ Board With 2 Analog Outputs

USB-231-OEM 16-Bit, 50 kS/s, Multifunction DAQ Board with 2 Analog Outputs
£25000

(£300.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:USB-231-OEM
Delivery to UK Only

Description

USB-231-OEM board provides improved cost/performance compared to our similarly priced 16-bit DAQ boards. The USB-231-OEM offers eight analog inputs, two analog outputs, eight DIO channels, and one counter input.

Analog Input
The USB-231-OEM provides four differential (DIFF)/eight 16-bit single-ended (SE) analog inputs with a fixed analog input range of ±10 V.

Sample Rate
The maximum continuous sample rate is an aggregate rate for USB-231-OEM, up to 50 kS/s.

Analog Output
The USB-231-OEM provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.

Digital I/O
Eight TTL-level digital I/O lines are included with the USB-231-OEM. Each digital channel is software-selectable for input or output.

Digital input voltage ranges from 0 V to 5 V are permitted, with thresholds of 0.8 V (low) and 2.3 V (high).

When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of V4 mA.

All DIO lines are set to high-impedance inputs at system startup and reset. The board does not drive the signal high or low. Each line has a weak pull-down resistor connected to it.

All digital I/O updates and samples are software-paced.

Digital Trigger Input
The USB-231-OEM includes an external digital trigger input that is software-selectable for rising edge or falling edge detection.

Counter Input
The USB-231-OEM supports one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.

 

Features

  • 8 SE/4 DIFF analog inputs
  • 50 kS/s sample rate
  • 8 digital I/O, individually-configurable
  • One 32-bit counter input
  • Two 16-bit analog outputs
  • No external power required
  • Micro-USB Type B connector

Cased Version Available

Software

TracerDAQ® software included for acquiring and displaying data and generating signals

Universal Library includes support for Visual Studio® and Visual Studio® .NET, including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET

InstaCal™ software utility for installing, calibrating, and testing

Support for DASYLab®

ULx for NI LabVIEW™

Supported Operating Systems: Windows® 8/7/Vista®/XP, 32-bit or 64-bit

Specifications

Product Specifications

Technical

Product Manual

Description

USB-231-OEM board provides improved cost/performance compared to our similarly priced 16-bit DAQ boards. The USB-231-OEM offers eight analog inputs, two analog outputs, eight DIO channels, and one counter input.

Analog Input
The USB-231-OEM provides four differential (DIFF)/eight 16-bit single-ended (SE) analog inputs with a fixed analog input range of ±10 V.

Sample Rate
The maximum continuous sample rate is an aggregate rate for USB-231-OEM, up to 50 kS/s.

Analog Output
The USB-231-OEM provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.

Digital I/O
Eight TTL-level digital I/O lines are included with the USB-231-OEM. Each digital channel is software-selectable for input or output.

Digital input voltage ranges from 0 V to 5 V are permitted, with thresholds of 0.8 V (low) and 2.3 V (high).

When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of V4 mA.

All DIO lines are set to high-impedance inputs at system startup and reset. The board does not drive the signal high or low. Each line has a weak pull-down resistor connected to it.

All digital I/O updates and samples are software-paced.

Digital Trigger Input
The USB-231-OEM includes an external digital trigger input that is software-selectable for rising edge or falling edge detection.

Counter Input
The USB-231-OEM supports one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.

 

Features

Cased Version Available

Software

TracerDAQ® software included for acquiring and displaying data and generating signals

Universal Library includes support for Visual Studio® and Visual Studio® .NET, including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET

InstaCal™ software utility for installing, calibrating, and testing

Support for DASYLab®

ULx for NI LabVIEW™

Supported Operating Systems: Windows® 8/7/Vista®/XP, 32-bit or 64-bit

Specifications

Product Specifications

Technical

Product Manual

Recently Viewed Products