(£405.60 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The I-7580 is a PROFINET IO device with RT functionality that supports RS-232, RS-422 and RS-485 serial interfaces. Users can choose one of these serial communication interfaces to apply. It is easy to allow users to take almost serial device to a PROFINET network including serial remote I/O devices, sensors, actuators, HMI, barcode readers and RFID, etc.
Utility
| Hardware | |
| CPU | 32-bit CPU Core |
| RAM/Flash/EEPROM | 32 MB / 4 MB / 8 KB |
| Watchdog | CPU built-in |
| ESD Protection | 4 kV class A |
| PROFINET Interface | |
| Protocol | PROFINET IO Device |
| Conformance Classes | Class B |
| Services | RTC, RTA, CL-RPC, DCP, LLDP, I&M |
| Cycle Time | 1 ms (min) |
| Ethernet Interface | |
| Controller | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
| Connector | RJ-45 x 2 (LED indicators) , Integrated 2-Port Switch |
| Services | ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging |
| UART Interface | |
| COM | RS-232/RS-422/RS-485 (can't be used simultaneously) |
| COM Connector |
3-pin screwed terminal block (RxD, TxD, GND) 4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-) 2-pin screwed terminal block (DATA+, DATA-) |
| Baud Rate (bps) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800 |
| Data bit | 7, 8 |
| Stop bit | 1 |
| Parity | None, Even, Odd |
| LED | |
| Round LED | AP LED, BOOT LED, ERR LED |
| Power | |
| Power supply | Unregulated +10 ~ +30 VDC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 3.4 W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions | 42 mm x 76 mm x 119 mm (W x L x H) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 80 ℃ |
The I-7580 is a PROFINET IO device with RT functionality that supports RS-232, RS-422 and RS-485 serial interfaces. Users can choose one of these serial communication interfaces to apply. It is easy to allow users to take almost serial device to a PROFINET network including serial remote I/O devices, sensors, actuators, HMI, barcode readers and RFID, etc.
Utility
| Hardware | |
| CPU | 32-bit CPU Core |
| RAM/Flash/EEPROM | 32 MB / 4 MB / 8 KB |
| Watchdog | CPU built-in |
| ESD Protection | 4 kV class A |
| PROFINET Interface | |
| Protocol | PROFINET IO Device |
| Conformance Classes | Class B |
| Services | RTC, RTA, CL-RPC, DCP, LLDP, I&M |
| Cycle Time | 1 ms (min) |
| Ethernet Interface | |
| Controller | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
| Connector | RJ-45 x 2 (LED indicators) , Integrated 2-Port Switch |
| Services | ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging |
| UART Interface | |
| COM | RS-232/RS-422/RS-485 (can't be used simultaneously) |
| COM Connector |
3-pin screwed terminal block (RxD, TxD, GND) 4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-) 2-pin screwed terminal block (DATA+, DATA-) |
| Baud Rate (bps) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800 |
| Data bit | 7, 8 |
| Stop bit | 1 |
| Parity | None, Even, Odd |
| LED | |
| Round LED | AP LED, BOOT LED, ERR LED |
| Power | |
| Power supply | Unregulated +10 ~ +30 VDC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 3.4 W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions | 42 mm x 76 mm x 119 mm (W x L x H) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 80 ℃ |
