CX403 InTemp Bluetooth Ambient Temperature Data Logger

Description

The InTemp CX403 data logger features an internal sensor for monitoring ambient temperature. Communicating wirelessly via Bluetooth to mobile devices, this logger features a built-in LCD display to view ambient temperature, advanced audible and visual alarm capabilities to notify of temperature excursions, and a NIST Certification of Calibration.

With the optional CX Gateway, you can get remote notifications of temperature excursions and automatically download data from loggers within range of the device. 

Available Apps are:

InTempConnect: A cloud-based data command-center control for monitoring all loggers throughout your global supply chain

InTemp App: A free mobile app that streamlines logger configuration and readout, and automatically uploads reports to InTempConnect

InTempVerify: A free mobile app that manages user permissions and the activation of data downloads by anyone—anywhere, anytime

Features

• Internal sensor only (No probe)
• Refrigerated to ambient monitoring
• Easy-to-read display with current and daily min/max temperatures
• Logger setup and download of data in seconds – without a PC or cable
• +/- 0.5C accuracy for reliable temperature readings
• GDP/GMP compliant
• Integrates with mobile and cloud platforms for a 21 CFR Part 11 compliant solution
• Bluetooth transmission of data and alarm states
• Real-time alerts and automatic data downloads with optional CX Gateway device
• Battery-powered to guard against local power loss

Specifications

Ambient Temperature Sensor

• Range: -30° to 70°C (-22° to 158°F)
• Accuracy:
  ±0.5°C from -15° to 70°C (±0.9°F from 5° to 158°F)
  ±1.0°C from -30° to -15°C (±1.8°F from -22° to 5°F)
• Resolution:
  0.024°C at 25°C (0.04°F at 77°F)
• NIST Calibration: Single point NIST calibration

Logger

• Radio Power: 1 mW (0 dBm)
• Transmission Range: Approximately 30.5 m (100 ft) line-of-sight
• Wireless Data Standard: Bluetooth Low Energy (Bluetooth Smart)
• Logger Operating Range: -30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
• Logging Rate: 1 second to 18 hours
• Battery Type: Two AAA batteries, user replaceable
• Battery Life: 1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life.
• Memory: 128 KB (84,650 measurements, maximum)
• Full Memory Download Time: Approximately 60 seconds; may take longer the farther the device is from the logger
• LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
• Dimensions: 9.4 x 4.5 x 2.59 cm (3.7 x 1.77 x 1.02 inches)
• Weight: 90.2 g (3.18 oz)
• Environmental Rating: IP54

Passed RTCA DO160G, part 21H

Technical

CX403 InTemp Ambient temperature logger datasheet