This site uses cookiesX
Despite Covid-19 we are still fully operational and able to process orders and deliver products
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

CS-GNG-100 Mini Current Switch Go-no-Go, 100A Rated, 0.5A Trip

CS-GNG-100 Mini Current Switch Go-no-Go, 100A rated, 0.5A trip
£1600

(£19.20 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:CS-GNG-100

Description

The CS Series current switch monitors line current for electrical loads such as pumps, conveyors, lighting, heaters or fans and closes the output contacts when the trip point is exceeded.

The CS-GnG-100 has a factory set trip point of 0.5 Amps to provide Go/No Go status operation. The sensor requires no external power as it is totally powered by induction from the AC line being monitored. The switch output is normally open and when the input current exceeds the trip setpoint the switch closes to provide an on/off digital signal to the controller.

Specifications

  • Current Setpoint : Fixed at 0.5 Amps
  • Maximum Input Current:. 100 Amps continuous
  • Sensor Power: Self-powered
  • Output Type : Solid-state mosfet
  • Output Switch Action: Normally open
  • Output Switch Ratings : 30 Vac/dc, 500 mA Max.
  • Von @ 24 Vdc at 500mA : < 50 mV
  • Frequency : 50/60 Hz
  • Response Time: 200 mS
  • Typical Insulation Class: 600 Vac, Insulated conductors
  • Operating Temperature: -15 to 60 °C (5 to 140 °F)
  • Operating Humidity : 5 to 90% RH non-condensing
  • Terminal Block :14 to 22 AWG
  • Dimensions: 48 x 49 x 21 mm 1.9 x 1.93 x 0.83 in)
  • Sensor Aperture: 11.4 mm (0.45 in)
  • Enclosure Material: ABS/PC, UL94 V-0
  • Agency Approvals: cULus Listed

Technical

Datasheet

Description

The CS Series current switch monitors line current for electrical loads such as pumps, conveyors, lighting, heaters or fans and closes the output contacts when the trip point is exceeded.

The CS-GnG-100 has a factory set trip point of 0.5 Amps to provide Go/No Go status operation. The sensor requires no external power as it is totally powered by induction from the AC line being monitored. The switch output is normally open and when the input current exceeds the trip setpoint the switch closes to provide an on/off digital signal to the controller.

Specifications

Technical

Datasheet

Recently Viewed Products