To give you the best experience we use cookies. Learn More

OK

100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

USB-CTR04-OEM High-Speed Counter/Timer Device With 4 Counter I/O

USB-CTR04-OEM High-Speed Counter/Timer Device with 4 Counter I/O
£39800

(£477.60 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:USB-CTR04-OEM
Delivery to UK Only

Description

The USB-CTR-OEM Series of high-speed pulse counter/timer boards consists of the USB-CTR08-OEM (eight counter channels) and USB-CTR04-OEM (four counter channels).

Both boards support multiple counting modes and include four PWM timers and eight individually-configurable digital I/O channels.

Counter I/O and Gating
USB-CTR-OEM Series boards supports an aggregate throughput rate of 8 MB/s.

These boards can be configured for any resolution up to 64-bits, and provide the following data streaming rates for these common resolution settings:
16-bit: 4 MHz
32-bit: 2 MHz
64-bit: 1 MHz

Each counter channel on a USB-CTR-OEM Series board has screw-terminal connection points for counter input, counter output, and counter gate.

Counter Input Modes
USB-CTR-OEM Series boards support the following counter input modes:
Totalize 
Period measurement
Pulse-width measurement
Timing measurement

Debounce Filters
USB-CTR-OEM Series boards have debounce circuitry which eliminates switch-induced transients that are typically associated with electromechanical boards including relays, proximity switches, and encoders.

All debounce filter options are software selectable. You can select a debounce time, debounce mode, and rising-edge or falling-edge sensitivity. Each channel can be debounced with 16 programmable debounce times in the range of 500 ns to 25.5 ms.

The signal from the buffer can be inverted before it enters the debounce circuitry. The inverter is used to make the input rising-edge or falling-edge sensitive.

Digital I/O
USB-CTR-OEM Series boards can connect up to eight digital I/O lines. The digital I/O terminals can detect the state of any TTL-level input.

Timer Output
USB-CTR-OEM Series boards have four 32-bit timer outputs. Each timer can generate a programmable width pulse with a software-selectable frequency in the range of 0.02235 Hz to 48 MHz. At higher frequencies, the timer output frequency and duty cycle depend on the load impedance and the supply.

The timer output rate and pulse width can be updated asynchronously at any time; however, doing so results in a pulse stream that is not seamless.

Trigger Input
USB-CTR-OEM Series boards can trigger synchronous acquisitions of counter data internally with software or externally using the digital trigger input screw terminal.

External Clock Pacing
You can pace synchronous acquisition of counter data by the onboard clock or by an external clock connected to the external clock input terminal.

Features

High-speed pulse counter for general counting applications

Available with 8 or 4 counter I/O

48 MHz maximum input frequency

Programmable resolution up to 64-bits

Aggregate scan rate of 8 MB/s

Supports the following counter input modes:
- Totalize (event counting)
- Period measurements
- Pulse-width measurements
- Timing measurements

Debounce filter circuitry with flexible edge, level, direction, and debounce settings to better adapt to signals

Four independent pulse-width modulation (PWM) timers with count, period, delay, and pulse-width registers

Eight individually-configurable digital I/O channels

Synchronous high-speed reads of digital and counter inputs

External clock input and internal clock output

External digital trigger

No external power required

Cased Versions Available

Software

Support for DAQami, easy-to-use advanced data logging application to acquire,
view, and log data

TracerDAQ® for acquiring and displaying data and generating signals 
Universal Library includes support for Visual Studio® and Visual Studio® .NET, 

including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET

Linux® open-source drivers

InstaCal™ software utility for installing, configuration, and testing

Support for DASYLab® 

Ulx for NI LabVIEW™

Supported Operating Systems: Windows® 10/8/7/Vista®/XP, 32-bit or 64-bit; Linux®

Specifications

Product Specifications

Technical

Product Manual

Description

The USB-CTR-OEM Series of high-speed pulse counter/timer boards consists of the USB-CTR08-OEM (eight counter channels) and USB-CTR04-OEM (four counter channels).

Both boards support multiple counting modes and include four PWM timers and eight individually-configurable digital I/O channels.

Counter I/O and Gating
USB-CTR-OEM Series boards supports an aggregate throughput rate of 8 MB/s.

These boards can be configured for any resolution up to 64-bits, and provide the following data streaming rates for these common resolution settings:
16-bit: 4 MHz
32-bit: 2 MHz
64-bit: 1 MHz

Each counter channel on a USB-CTR-OEM Series board has screw-terminal connection points for counter input, counter output, and counter gate.

Counter Input Modes
USB-CTR-OEM Series boards support the following counter input modes:
Totalize 
Period measurement
Pulse-width measurement
Timing measurement

Debounce Filters
USB-CTR-OEM Series boards have debounce circuitry which eliminates switch-induced transients that are typically associated with electromechanical boards including relays, proximity switches, and encoders.

All debounce filter options are software selectable. You can select a debounce time, debounce mode, and rising-edge or falling-edge sensitivity. Each channel can be debounced with 16 programmable debounce times in the range of 500 ns to 25.5 ms.

The signal from the buffer can be inverted before it enters the debounce circuitry. The inverter is used to make the input rising-edge or falling-edge sensitive.

Digital I/O
USB-CTR-OEM Series boards can connect up to eight digital I/O lines. The digital I/O terminals can detect the state of any TTL-level input.

Timer Output
USB-CTR-OEM Series boards have four 32-bit timer outputs. Each timer can generate a programmable width pulse with a software-selectable frequency in the range of 0.02235 Hz to 48 MHz. At higher frequencies, the timer output frequency and duty cycle depend on the load impedance and the supply.

The timer output rate and pulse width can be updated asynchronously at any time; however, doing so results in a pulse stream that is not seamless.

Trigger Input
USB-CTR-OEM Series boards can trigger synchronous acquisitions of counter data internally with software or externally using the digital trigger input screw terminal.

External Clock Pacing
You can pace synchronous acquisition of counter data by the onboard clock or by an external clock connected to the external clock input terminal.

Features

High-speed pulse counter for general counting applications

Available with 8 or 4 counter I/O

48 MHz maximum input frequency

Programmable resolution up to 64-bits

Aggregate scan rate of 8 MB/s

Supports the following counter input modes:
- Totalize (event counting)
- Period measurements
- Pulse-width measurements
- Timing measurements

Debounce filter circuitry with flexible edge, level, direction, and debounce settings to better adapt to signals

Four independent pulse-width modulation (PWM) timers with count, period, delay, and pulse-width registers

Eight individually-configurable digital I/O channels

Synchronous high-speed reads of digital and counter inputs

External clock input and internal clock output

External digital trigger

No external power required

Cased Versions Available

Software

Support for DAQami, easy-to-use advanced data logging application to acquire,
view, and log data

TracerDAQ® for acquiring and displaying data and generating signals 
Universal Library includes support for Visual Studio® and Visual Studio® .NET, 

including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET

Linux® open-source drivers

InstaCal™ software utility for installing, configuration, and testing

Support for DASYLab® 

Ulx for NI LabVIEW™

Supported Operating Systems: Windows® 10/8/7/Vista®/XP, 32-bit or 64-bit; Linux®

Specifications

Product Specifications

Technical

Product Manual

Recently Viewed Products