This site uses cookiesX
Free Shipping
100% Guarantee
Contact Us

  0 View Cart

Cart Contents
There are no items in your cart
UK Freephone:0800 048 1057
Email Us
View Cart 0 Items
Cart Contents
There are no items in your cart
View Product Range ▼

SC-1608-2AO-ENET 16-Bit, 250 KS/s, Ethernet DAQ Board

SC-1608-2AO-ENET 16-Bit, 250 kS/s, Ethernet DAQ Board
£1,04500

(£1,254.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:SC-1608-2AO-ENET
Delivery to UK Only

Description

The SC-1608-2AO-ENET provides an all-in-one solution to measure and condition analog signals (voltage, temperature, current, frequency, strain, and so on), as well as high voltage and relay digital signals.

The SC-1608-2AO-ENET provides mounting connectors for eight 8B analog input modules, two 8B analog output modules, and eight digital I/O modules.

Conditioned signals are brought out to screw terminals. Users can access all signals via the 50-pin header connector. Any non-conditioned input or output can be used as a non-isolated channel.

SC-1608-2AO-ENET
The SC-1608-2AO-ENET provides eight conditioned analog inputs via the front screw terminal. Two analog outputs, eight DIO, a counter input, a trigger input, and external clocking are available via the 50-pin header. This product has a 10/100 BASE-T communication port.

8B Analog I/O Signal Conditioning Modules
8B analog I/O modules provide 500 V channel-to-channel isolated I/O signal conditioning. Users mix and match on a per-channel basis between supported voltage, TC, RTD, strain gage, current, and frequency modules. The SC-1608-2AO-ENET provides mounting locations for eight 8B input modules and two 8B output modules. Positive, negative, and excitation signals are brought out to screw terminals for field wiring connections.

Cold Junction Compensation (CJC)
Users can enable CJC functionality with onboard jumpers for each 8B thermocouple input module installed.

Current Shunt Resistors
Sockets are available for users to install plug-in shunt resistors to monitor a 4-20 mA current loop or to measure current using 8B analog voltage input modules.

SSR Digital I/O Control Modules
SSR digital I/O modules are isolated relay control modules. The SC-1608-2AO-ENET provides mounting locations for eight DIO modules. Users set the input/output type of each module with a DIP switch. Positive and negative relay contacts are brought out to screw terminals for field wiring connections.

Digital Output Logic Control
The control logic polarity for each digital output module is configurable with an onboard jumper for inverted logic (active high, default) or non-inverted logic (active low). This jumper setting has no effect on digital input modules.

Signal Connections
The eight analog inputs, two analog outputs, and eight digital I/O that interface with the 8B analog I/O modules and digital I/O modules are brought out to screw terminals and to a 50-pin header connector for field wiring connections.

Non-Isolated Channels
Any unconditioned input or output can be accessed on the header connector as a non-isolated channel.

External Power Supply
External power is required. An external 12 VDC supply ships with each SC-1608-2AO-ENET; users can alternately connect their own supply to an onboard screw terminal.

Mounting Options
The SC-1608 Series can be used on a bench or installed in a rack mount enclosure (MCC p/n ENC-19X5X5).

Features

Ethernet DAQ device with analog (8B) and digital (SSR) signal conditioning

Directly measure voltage, strain, temperature, current, and frequency using eight 8B analog I/O modules

500 V channel-to-channel isolated I/O signal conditioning

Digital sense and switch up to 280 VAC using eight solid state relay (SSR) modules

250 kS/s sample rate

16-bit resolution

One 32-bit counter

Two 16-bit analog outputs, isolated using 8B output modules

Screw terminals and a 50-pin header connector for field wiring

External 12 volt power supply

Rack mount enclosure available

NOTE: 8B analog modules and SSR digital modules sold separately


Click here if you have trouble viewing YouTube videos.

Specifications

Data Sheet

 

For the full range of Signal Conditioning Options, please refer to:

Signal Conditioning Datasheet

Technical

User's Manual

Description

The SC-1608-2AO-ENET provides an all-in-one solution to measure and condition analog signals (voltage, temperature, current, frequency, strain, and so on), as well as high voltage and relay digital signals.

The SC-1608-2AO-ENET provides mounting connectors for eight 8B analog input modules, two 8B analog output modules, and eight digital I/O modules.

Conditioned signals are brought out to screw terminals. Users can access all signals via the 50-pin header connector. Any non-conditioned input or output can be used as a non-isolated channel.

SC-1608-2AO-ENET
The SC-1608-2AO-ENET provides eight conditioned analog inputs via the front screw terminal. Two analog outputs, eight DIO, a counter input, a trigger input, and external clocking are available via the 50-pin header. This product has a 10/100 BASE-T communication port.

8B Analog I/O Signal Conditioning Modules
8B analog I/O modules provide 500 V channel-to-channel isolated I/O signal conditioning. Users mix and match on a per-channel basis between supported voltage, TC, RTD, strain gage, current, and frequency modules. The SC-1608-2AO-ENET provides mounting locations for eight 8B input modules and two 8B output modules. Positive, negative, and excitation signals are brought out to screw terminals for field wiring connections.

Cold Junction Compensation (CJC)
Users can enable CJC functionality with onboard jumpers for each 8B thermocouple input module installed.

Current Shunt Resistors
Sockets are available for users to install plug-in shunt resistors to monitor a 4-20 mA current loop or to measure current using 8B analog voltage input modules.

SSR Digital I/O Control Modules
SSR digital I/O modules are isolated relay control modules. The SC-1608-2AO-ENET provides mounting locations for eight DIO modules. Users set the input/output type of each module with a DIP switch. Positive and negative relay contacts are brought out to screw terminals for field wiring connections.

Digital Output Logic Control
The control logic polarity for each digital output module is configurable with an onboard jumper for inverted logic (active high, default) or non-inverted logic (active low). This jumper setting has no effect on digital input modules.

Signal Connections
The eight analog inputs, two analog outputs, and eight digital I/O that interface with the 8B analog I/O modules and digital I/O modules are brought out to screw terminals and to a 50-pin header connector for field wiring connections.

Non-Isolated Channels
Any unconditioned input or output can be accessed on the header connector as a non-isolated channel.

External Power Supply
External power is required. An external 12 VDC supply ships with each SC-1608-2AO-ENET; users can alternately connect their own supply to an onboard screw terminal.

Mounting Options
The SC-1608 Series can be used on a bench or installed in a rack mount enclosure (MCC p/n ENC-19X5X5).

Features

Ethernet DAQ device with analog (8B) and digital (SSR) signal conditioning

Directly measure voltage, strain, temperature, current, and frequency using eight 8B analog I/O modules

500 V channel-to-channel isolated I/O signal conditioning

Digital sense and switch up to 280 VAC using eight solid state relay (SSR) modules

250 kS/s sample rate

16-bit resolution

One 32-bit counter

Two 16-bit analog outputs, isolated using 8B output modules

Screw terminals and a 50-pin header connector for field wiring

External 12 volt power supply

Rack mount enclosure available

NOTE: 8B analog modules and SSR digital modules sold separately


Click here if you have trouble viewing YouTube videos.

Specifications

Data Sheet

 

For the full range of Signal Conditioning Options, please refer to:

Signal Conditioning Datasheet

Technical

Show Recently Viewed Products