I-7017F Analog Input Module (8 Channel)

Description

This module provides 8 differential channels, capable of receiving data from sensors outputing Voltage or Current (via use of an external resistor) depending on the device mode selected.

Features

• 16 bit ADC (12-bit mode for fast speed)
• 3000V dc inter module isolation
• Direct measurement of voltage and current
• Can be Configured using simple ASCII Commands

Specifications

Analog Input

• Input Channels: 8 differential (or 6 differential and 2 single- ended by jumper select)
• Input Type: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V,
  +/-20mA (requires optional external 125 ohm resistor)
• Resolution: 16-bit(Normal Mode) / 12-bit(Fast Mode)
• Sampling Rate: 10 Samples/ Second (Normal Mode) / 60 Samples (Fast Mode)
• Accuracy: +/-0.1% (Normal Mode) / +/-0.5% (Fast Mode)
• Band Width: 15.7Hz (Normal Mode) / 78.7Hz (Fast Mode)
• Zero Drift: +/-20uV/°C
• Span Drift: +/-25ppm/°C
• Common Mode Rejection: 86dB min
• Normal Mode Rejection: 100dB
• Input Impedance: 20M Ohms
• Over voltage Protection: +/-35V (P-P)
• Photo-Isolation: 3750 Vrms
• Intra-module Isolation, Field to Logic: 3000 Vdc

Others

• Interface: RS-485
• Format: N,8,1
• Baud Rate: 1200 ~ 115200 bps
• LED Display : 1 LED as Power/ Communication indicator
• Power Input: +10 to +30 Vdc
• Power Consumption : 1.3W
• Operating temperature: -25 to 75°C
• Storage temperature: -40 to 85°C
• Humidity: 5 to 95%, non-condensing

Technical

User Manual