H22-001 Energy Logger Data Logger

Description

The HOBO Energy Logger is a modular, re-configurable data logging system for energy and industrial monitoring applications. 
 

The 15-channel system enables energy and facility management professionals to quickly and easily solve a broad range of monitoring applications without having to purchase a toolbox full of loggers.
 

Innovative, snap-in FlexSmart™ signal conditioning modules convert signals from nearly any type of sensor. A suite of pre-defined plug-and-play smart sensors and powerful HOBOware® software make set-up and deployment fast and easy. You can also expand your system capabilities with Ethernet or remote data access communications.
 

Please contact us for more detail on available sensors and their pricing. Sensors available include: kWh,kW, TRMS Amps and Volts, Relative Humidity,Temperature, Differential Pressure, Gauge Pressure, DC Amps/Volts, Pulse Input, CO2, Wind, Light Intensity, Rain, Barometric Pressure.
 

IMPORTANT: HoboWare software and a serial cable is required to configure the units and download the data. Please purchase via the "Recommendations Products" area below. Examples of some of the compatible sensors can also be found below.

Features

• Onset's most flexible logger records up to 15 channels of over a dozen measurements
• Extensive sensor compatibility
• 6off RJ-12 Smart Sensor Input jacks for plug and play Temperature, Humidity and other Environmental Inputs
• 3off FlexSmart module slots
• 2 channel FlexSmart TRMS module (optional) for high-accuracy AC current and Voltage Measurement
• 2 channel FlexSmart Analog module (optional) provides +/- 0.25% FS accuracy (from 50mV to Full Scale) for common 4-20mA and 0-20Vdc sensor inputs
• Automatic sensor recognition - FlexSmart modules retain configuration until changed, providing plug-and-play conveniance for commonly used sensors
• Provides 12v excitation for third-party sensors
• Pre-configured smart sensors get you started fast
• Flexible power options include battery operation for AC power adapter
• Intuitive HOBOware software supports point and click system setup, data download and data plotting/analysis

Available Measurements

Using Pulse Input Adapter

• Single phase power (kW/kWh - pulse output, integrated or discreet CTs)
• Single/multi-phase power (kW/kWh - pulse output, integrated or discreet CTs)
• Water Flow (Gallons - pulse output, Metrima Meter)

Using FlexSmart TRMS Module

• AC Current or Voltage (True RMS)

Using FlexSmart Analog Module

• kW (Analog Output)
• Gauge Pressure
• Differential Air Pressure
• Carbon Dioxide
• Duct-mount RH
• 4-20mA
• 0-20Vdc (suitable for 2.5V, 5V and 10V sensors)

Specifications

• Operating range:
  -20° to 50°C with alkaline batteries
  -40° to 60°C with lithium batteries
• Sensor inputs: Three FlexSmart multi-channel modules and up to 6 Smart Sensors (which may have multiple parameters/channels)
• Sensor connectors: Six RJ-12 Smart Sensor jacks plus 3 FlexSmart module slots
• Communication: RS-232 via 3.5 mm serial port or/and 9-pin D-Sub connector
• Dimensions: 15.6 cm x 8.4 cm x 4.6 cm
• Weight: 435 g with batteries 238 g without batteries
• Memory: 512K nonvolatile flash data storage
• Memory modes: Stop when full; wrap when full
• Operational indicators: Six indicators provide logging and sensor network status
• Logging interval: One second to 18 hours, user-specified interval (2-second minimum for two-channel S-FS-TRMSA operation)
• Sensor excitation: 12 V DC at 200 mA total, with user-programmable warmup time on a per-channel basis
• Battery life: One year typical use (up to 75 mA excitation with 10-minute or longer logging Interval and 1-second warmup time)
• Battery type
  Eight standard AA alkaline batteries included (for operating conditions -20°C to 50°C);
  optional AA lithium batteries available for operating conditions of -40° to 60°C
• External power:
  Supports optional 13.6 V DC regulated AC Wall Adapter Connector.
  Internal batteries may remain installed. Alternatively, an automotive battery or 9-12 V DC regulated Wall Adapter may be used, but it is recommended to remove the internal batteries since they will discharge to the level of the external supply.
• Time accuracy: 0 to 2 seconds for the first data point and ±5 seconds per week at 25°C
• Logging mode: Immediate, timed delay, or trigger (button-push) start options; supports sampling intervals for some sensors
• Data communication: Current readings while logging; read out while logging; read out when stopped.

Technical

Energy Logger Pro Datasheet