U-DT-1 U-Shuttle Data Transporter

Description

The HOBO U-Shuttle Data Transporter provides convenient in-field data offload and relaunch of HOBO U-series loggers and HOBO Weather Stations, Micro Stations, and HOBO Energy Logger Pro systems.

The U-Shuttle's 2 x 16-character display shows current readings (for selected loggers), and logger status. An Optic USB Base Station is required for use with Optic USB loggers.

NOTE: Requires BHW-PC HoboWare Pro software (Not supported by BHW-Lite HoboWare Lite)

Features

• Requirements:
  HOBOware 2.2.0 or greater; USB cable (provided)
  Compatible logger with appropriate cable and/or base station
• Compatibility:
  All U-Series loggers, HOBO Weather Stations and Micro Stations (H21), and HOBO FlexSmart loggers (H22); not compatible with the HOBO Waterproof Shuttle (U-DTW-1)
• Firmware upgrades: Available on request as needed to provide compatibility with future supported logger models
• Operating temperature: 0° to 50°C
• Storage temperature :-10° to 50°C
• Time accuracy: ± 1 minute per month at 25°C
• Logger-to-shuttle transfer speed:
  USB/optic: 64K in approximately 30 seconds
  Serial: 512K in approximately 60 seconds
• Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
• Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers
• Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)
• Ports:
  RJ-12 jack for communicating with smart sensors
  mini-B full speed USB port for communicating with host computer
  full speed USB port for communicating with U-Series loggers and base stations
  high speed serial port for communicating with serial loggers
  Shuttle communicates with only one device at a time.
• Batteries Main: 2 AA alkaline batteries
• Clock backup: 1 CR1225 lithium battery (3 V)
• Battery life Main: One year or approximately 50 complete memory fills, typical use
• Clock backup: 10 years typical use (with main batteries installed)
• Weight: 153 g
• Dimensions: 11.0 x 6.9 x 2.7 cm
• Case materials: ABS case with urethane rubber grips, polycarbonate label

Specifications

Supported HOBO Loggers

• H21-001 Weather Station
• H21-002 Micro Station
• H22 Energy Logger Pro
• U9-001 State
• U9-002 Light On/Off
• U9-004 Motor On/Off AC Field
• U10-001 Temp
• U10-003 Temp/RH
• U11-001 3 State / 1 Event
• U12-001 Temperature
• U12-006 4-Channel External
• U12-011 Temp / RH
• U12-012 Temp / RH / Light / External
• U12-013 Temp / RH / 2 External Channel
• U12-014 J, K, S, T Thermocouple
• U12-008 Outdoor/Industrial 4-Channel External
• U12-015 Stainless Temp
• U12-015-02 Stainless 5-Inch Probe Temp
• U14-001 LCD Logger - Temperature/RH Data Logger
• U14-002 LCD Logger - Ext.Temperature/RH Data Logger

Technical

Shuttle Datasheet