CABLE-2.5-STEREO Voltage Input Cable

Description

An external input cable with 13mm (0.5") tinned braided wire leads and 1.8m (6 feet) of cable. Plugs directly into the external input jacks of the U12 or ZW series of Data Loggers to handle DC Voltages up to 2.5V.

For 5V or 10V sensors or inputs, please refer to the CABLE-ADAP5 or CABLE-ADAP10 respectively.

NOTE: HoboWare Pro software version is recommended to be used with a logger using a Voltage or Current input from a Sensor. HoboWare Pro includes a scaling facility to convert the input signal to engineering/measured values.

Specifications

• Input Range: 0 to 2.5 VDC
• Accuracy: ±2 mV; ±2.5 % of absolute reading
• Resolution: 0.6 mV
• Output power: 2.5 VDC at 2 mA; active only during measurements
• Length: 1.8m (6 foot) cable with 13mm (0.5 in.) tinned braided wire leads