This site uses cookiesX
Despite Covid-19 we are still fully operational and able to process orders and deliver products
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

RSM-405FT 3 Port Ethernet Ring + Dual Fibre Switch (ST) - Rugged

RSM-405FT 3 port Ethernet Ring + Dual Fibre Switch (ST) - rugged
£37100

(£445.20 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:RSM-405FT

Description

The RSM-405FT series is a range of real-time redundant ring switches from ICPDAS. The RS-405FT is a Redundant Ring Switch which has 3 Ethernet Ports (10/100 Base-T ) with 2 Fibre Optic Ports (100 Base-FX, ST Connector).

They can be used for several different applications including:

  • Link-lose-backup in the industrial field application. The ring topology quickly provides an alternative path should a network node or cable segment fail.
  • A cost effective redundant ring Ethernet LAN can be configured by mixing RS-405FT with other low cost unmanaged Ethernet Switches such as the NS-205/208 series
  • Ring Coupling : To join seperate ethernet rings together (such as over different floors or buildings).

Key features are:

  • The RS-405FT series are equipped with 2 power inputs, which are redundant of each other.
  • The relay output facility can deliver a warning signal on power or link failure
  • Modbus/TCP protocol Supported : This allows the administrator of an Ethernet LAN, through SCADA software, to obtain information regarding the condition and individual port status of the RS-405FT.

This unit is supplied in an IP20 rugged, high-strength steel case capable of either DIN-Rail or Wall Mounting.

Features

  • Plug and Play
  • Provide redundant path to Ethernet LAN
  • Support various ring Topologies
  • Real-time performance
  • Certified for harsh industrial environments
  • Support Modbus/TCP protocol to read port status
  • Relay output for link lose alarm
  • Support redundant power input
  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 3.2 Gbps high performance memory bandwidth.
  • Frame Buffer Memory : 512Kbit
  • Integrated look-up engine with dedicated 1K unicast MAC addresses.
  • Supports +10 ~ +30Vdc voltage
    Power failure alarm by Relay Output
  • Supports operating temperatures from 0 ~ +70°C
  • IP20 rugged hugh-strength metal case
  • DIN rail mount for industrial usage and screw hole for wall mounting

Specifications

Technology

  • Standards : IEEE 802.3, IEEE 802.3u, IEEE802.3x
  • Processing type: Store & forward wire speed switching - no relays
  • MAC Addresses supported : 1024
  • Memory Bandwidth : 3.2Gbps
  • Flow Control : IEEE802.3x flow control, back pressure flow control
  • Redundant Strategy: STP, Ring (ICPDAS)
  • Protocol: Modbus/RTU, Modbus/TCP, OPC, STP, Cyber Ring

Interface

  • RJ45 ports: 10/100BaseT(x) auto negotiation speed, F/H duplex mode and auto-MDI/MDIX connection.
  • Fibre Optics Port : 100 Base-FX (Multi-mode, ST Connector)
  • LED Indicators : 10/100M, Link/Act/Backup, Full/Half Duplex (Fibre Port)
  • Ethernet isolation : 1500 Vrms 1 minute
  • Frame Ground for EMS Protection : Yes
  • Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
    Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
  • Fibre Optic : Multi-mode fibre cables : 50/125, 62.5/125 or 100/140µm
    Distance : 2km (62.58/125µm recommended) for full duplex
    Wavelength : 1300 or 1310 nm
    Min. Tx Output : -20 dBm
    Max. Tx Output : -14 dBm
    Rx Sensitivity : -34 to -31 dBm
  • Ethernet Cables: 10 Base-T (Cat. 3, 4, 5 UTP Cable - 100m max.)
    100 Base-TX (Cat.5 UTP Cable - 100m max.)
  • Management Interface: Console, DIP/Rotary Switch
  • Alarm Output: Relay

Power

  • Input Voltage : +10 ~ +30Vdc
  • Power input isolation: 1kV
  • Alarm Contact: One relay output with current carrying capacity of 2A @ 30Vdc
  • Power consumption: 0.3A@24Vdc (+/-5%, arrowed)
  • Protection : Power reverse polarity protection
  • Frame Ground for EMS Protection : Yes
  • Connection : 7-Pin Removable Terminal Block

Mechanical

  • Case : Metal
  • Environmental Rating : IP20
  • Dimensions : 72.5mm x 110mm x 102mm (W x H x D)
  • Installation : DIN Rail Mount, Wall Mounting

Environmental

  • Operating Temperature : 0 to +70°C
  • Storage Temperature : -20 to +85°C
  • Ambient Relative Humidity : 10% to 90% non-condensing

Technical

Brochure

Description

The RSM-405FT series is a range of real-time redundant ring switches from ICPDAS. The RS-405FT is a Redundant Ring Switch which has 3 Ethernet Ports (10/100 Base-T ) with 2 Fibre Optic Ports (100 Base-FX, ST Connector).

They can be used for several different applications including:

  • Link-lose-backup in the industrial field application. The ring topology quickly provides an alternative path should a network node or cable segment fail.
  • A cost effective redundant ring Ethernet LAN can be configured by mixing RS-405FT with other low cost unmanaged Ethernet Switches such as the NS-205/208 series
  • Ring Coupling : To join seperate ethernet rings together (such as over different floors or buildings).

Key features are:

  • The RS-405FT series are equipped with 2 power inputs, which are redundant of each other.
  • The relay output facility can deliver a warning signal on power or link failure
  • Modbus/TCP protocol Supported : This allows the administrator of an Ethernet LAN, through SCADA software, to obtain information regarding the condition and individual port status of the RS-405FT.

This unit is supplied in an IP20 rugged, high-strength steel case capable of either DIN-Rail or Wall Mounting.

Features

Specifications

Technology

Interface

Power

Mechanical

Environmental

Technical

Brochure

Recently Viewed Products