CAN-8224 DeviceNet Embedded Device (2 I/O Slot)

Description

The CAN-8224 (I-8KDNS2) main control unit is specially designed to be a slave device of DeviceNet protocol. It follows the Specification of DeviceNet. In order to expand I/O channel more flexibly, an CAN-8x24 supports 1/2 slot(s) for I/O expansion and is compatible with a wide variety of ICP DAS DI/AI/DO/AO modules.

Users can choose DI/DO/AI/AO modules of the i-87K series or i-8000 series to fit the customized application. In addition, we also provide CAN Slave Utility to allow users to create the EDS file dynamically. The EDS file is based on DeviceNet and can be compatible with different DeviceNet master interfaces.

Features

• DeviceNet version : DeviceNet specification Volume I & II, Release 2.0
• Number of Nodes : 64 (max)
• Baud Rate : 125k, 250k, 500k
• Support Message Groups : Group 2 only server
• UCMM : Not supported
• I/O operating modes : Poll, Bit-strobe, change of state/cyclic
• Device Heartbeat message : Yes
• Device Shutdown message : Yes
• Produce EDS file dynamically : Yes
• No. of fragment I/O : 128 bytes (max) Input/Output
• MAC I/D setting : Rotary Switch
• Baud Rate setting : Rotary Switch
• DeviceNet Status LED : NET, MOD, PWR

Specifications

• CPU : 80186-80MHz
• Flash : 512K bytes
• SRAM : 512K bytes
• EEPROM : 2K bytes (Can upto 128K bytes or change to 2K/8K FRAM)
• NVRAM : 32 bytes
• Real Time Clock : 16 bit
• Watch Dog Timer : CPU built-in
• DeviceNet Status LED's : NET, MOD, PWR
• CAN Connector : 5-pin screw terminal connector
• CAN Controller : Philips SJA1000T CAN Controller
• CAN Transceiver : Philips 82C250/251 CAN Transceiver
• CAN 2.0A/2.0B supported
• Isolation : 2500Vrms on CAN side
• Termination resistor : 120 ohm selected by jumper
• Transfer Rate : 125k, 250k, 500k
• I/O Expansion port : 2
• Power Supply : 20W unregulated +10Vdc to +30Vdc
• Operating Temperature : -25°C to +75°C
• Storage Temperature : -30°C to +85°C
• Humidity : 5-95%
• Dimensions : 115 x 110 x 75.5 mm

Technical

Quickstart Guide
User Manual