This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

I-7012F Analog Input Module (1AI+1DI+2DO)

I-7012F Analog Input Module (1AI+1DI+2DO)
£16500

(£198.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:I-7012F

Description

The I-7012F is a single channel  analog Input module for measuring thermocouple, dc voltages and current. Optionally it can  run in fast mode (100 sample/sec rather than 10 sample/sec) by using the ADC in 12-bit mode. 

It has a digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which can be used for Alarm Output.

 

Features

  • 16 bit ADC (12-bit mode for fast speed)
  • 3000V dc inter module isolation
  • Integrated digital input and output
  • Event counters
  • Autonomous alarm output
  • Direct measurement of voltage and current
  • Can be Configured using simple ASCII Commands

Specifications

Analog Input

  • Resolution: 12 bits (Fast Mode); 16 bits (normal mode)
  • No of inputs: 1
  • Input Type: DC voltage, 0-20mA
  • Sampling Rate: 100 Samples/sec (fast mode) ; 10 samples/sec (normal mode)
  • Input Ranges: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA (with optional 125R resistor)
  • Accuracy = +/-0.25% or better
  • Common Mode Rejection = 86dB

Digital Input

  • Channels = 1
  • Logic 0 = +1V max
  • Logic 1 = +3.5V to +30V
  • Max. Input Frequency = 50Hz
  • Min. Pulse Width = 1ms

Digital Output

  • Channels = 2
  • Output Type = Sink, Open collector to 30V
  • Output Load = 30mA max. per channel
  • Power Dissipation = 300mW

Other

  • Interface = RS485
  • Format : N,8,1
  • Baud Rate : 1200 - 115200 bps
  • LED Display = Power/Comms indicator
  • Power Input = +10V to +30V dc
  • Power Consumption = 1.3W
  • Operating Temp. = -25 to +75ºC
  • Storage Temp. = -40 to +85ºC
  • Humidity = 5 to 95%, non-condensing

Technical

User Manual

Description

The I-7012F is a single channel  analog Input module for measuring thermocouple, dc voltages and current. Optionally it can  run in fast mode (100 sample/sec rather than 10 sample/sec) by using the ADC in 12-bit mode. 

It has a digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which can be used for Alarm Output.

 

Features

Specifications

Analog Input

Digital Input

Digital Output

Other

Technical

User Manual

Recently Viewed Products