This site uses cookiesX
Despite Covid-19 we are still fully operational and able to process orders and deliver products
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

ISN-101/DIN Liquid Leak Detection Module (DIN Rail Mount)

iSN-101/DIN Liquid Leak Detection Module (DIN Rail mount)
£4100

(£49.20 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:iSN-101/DIN

Description

The iSN-101 Liquid Leak Detection Module is a low-cost intelligent liquid leak detection device that can be used to directly control a Relay Output. No additional conversion module is needed and the iSN-101 can be easily integrated with a variety of monitoring systems to achieve remote alarm and remote device control. The iSN-101 Liquid Leak Detection module can be used to monitor double-core leader cable lengths of up to 500 meters, and can be used with both the extended cable and its included liquid leak detection cable. If liquid is detected, the controller immediately activates the output relay - the normally open, normally closed passive output signal . The module can be easily integrated with other collection hosts connected to the network.

The iSN-101 is suitable for real-time leak detection in critical locations, such as computer room base stations, warehouses, libraries, museums and industrial sites, and also for air handling equipment, refrigeration units, liquid containers, or pump tanks, etc., where there is a need to monitor any leakage of the equipment.


When required, communication with the iSN-101 can be programmed based on the Modbus RTU protocol, with the added benefit that different addresses can be configured via hardware to allow for Modbus RTU communication.

 

Apart from the base product, 3 kit options are available:

iSN-101/S with 3m Leader & 1m Liquid detect cable
iSN-101/S/DIN
= iSN-101/DIN + 3m leader cable + 1m Liquid Detect Cable


iSN-101/S2/DIN
= iSN-101/DIN + 3m leader cable + 3m Liquid Detect Cable

iSN-101/S3 with Liquid detect probe
iSN-101/S3/DIN 
= iSN-101/DIN + Liquid Detect Probe

 

Features

  • 1-ch Liquid Leak Detection
  • Water Leakage detection triggers and audible alarm
  • A mute button to silence the audible alarm
  • Two LED indicators to display the status of the power and the alarm
  • Relay Output for Water Leakage Alarm
  • Liquid Leak Detection Cable and Extended Cable can be up to 500 meters
  • Sensitivity adjustable detection
  • Supports the DCON and the Modbus RTU Protocols
  • Embedded Dual Watchdog
  • Wide Operating Temperature Range: -25 to +75°C
  • Tiny Form Factor with Easy Screw Mounting

Specifications

I/O specifications

Analog Input
Channels 1
Wiring Cables Length 500 meters (include Liquid Leak Detection Cable and Extended Cables)
Sound Off Button The button is used to stop the audible alarm.
Sensitivity Adjustment Range 26 KΩ ~ 580 KΩ
Detection of Pure Water Yes, 2uS/cm
Water Leakage Alarm Yes, 1 Sec ( Built-in Buzzer)
Relay Output for Water Leakage Alarm
Channels 1
Form C Relay 0.5 A @ 125 VAC
2 A @ 30 VDC
 
System Specifications
Communication
Interface RS-485
Format N,8,1 / O,8,1 / E,8,1 / N,8,2
Baud Rate Software Configuration: 1200 ~ 115200 bps
Protocol Modbus RTU or DCON
Node Addresses 96 ~ 127 for hardware configuration
0 ~ 255 for software configuration
LED Indicators
LED Indicators 1 as Power Indicator. 1 as Alarm Indicator.
EMS Protection
ESD (IEC 61000-4-2) ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power
Power
Reverse Polarity Protection Yes
Input Voltage Range 10 to 30 VDC
Consumption 1.5 W Max.
Mechanical
Dimensions (W x L x H) 83 mm x 70 mm x 29 mm
Installation DIN-Rail
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing

 

Applications

The iSN-101 is a leakage detection module used in water pipe leak monitoring in buildings with two working modes.
1. Work with the water sense cable that installed near the possible leaking pipe or area to detect leakage with alarm.
2. Work with the water leakage probe that installed in fixed possible leak locations to detect.
The leakage monitoring is applied to the water pipes, fire pipes and sewage pipes of buildings, as well as the detecting of domestic water, drainage and electric equipment, which can effectively achieve water saving and ensure the safety of living. The iSN-101 can detect leakages, send out signal and alarms, combine with the WISE IoT Edge Controller or TPD/VPD Touch HMI, and to further integrate with the mobile APP or community system.

iSN-101 Liquid Detect Application
iSN-101 Liquid Detect Application 2

Description

The iSN-101 Liquid Leak Detection Module is a low-cost intelligent liquid leak detection device that can be used to directly control a Relay Output. No additional conversion module is needed and the iSN-101 can be easily integrated with a variety of monitoring systems to achieve remote alarm and remote device control. The iSN-101 Liquid Leak Detection module can be used to monitor double-core leader cable lengths of up to 500 meters, and can be used with both the extended cable and its included liquid leak detection cable. If liquid is detected, the controller immediately activates the output relay - the normally open, normally closed passive output signal . The module can be easily integrated with other collection hosts connected to the network.

The iSN-101 is suitable for real-time leak detection in critical locations, such as computer room base stations, warehouses, libraries, museums and industrial sites, and also for air handling equipment, refrigeration units, liquid containers, or pump tanks, etc., where there is a need to monitor any leakage of the equipment.


When required, communication with the iSN-101 can be programmed based on the Modbus RTU protocol, with the added benefit that different addresses can be configured via hardware to allow for Modbus RTU communication.

 

Apart from the base product, 3 kit options are available:

iSN-101/S with 3m Leader & 1m Liquid detect cable
iSN-101/S/DIN
= iSN-101/DIN + 3m leader cable + 1m Liquid Detect Cable


iSN-101/S2/DIN
= iSN-101/DIN + 3m leader cable + 3m Liquid Detect Cable

iSN-101/S3 with Liquid detect probe
iSN-101/S3/DIN 
= iSN-101/DIN + Liquid Detect Probe

 

Features

Specifications

I/O specifications

Analog Input
Channels 1
Wiring Cables Length 500 meters (include Liquid Leak Detection Cable and Extended Cables)
Sound Off Button The button is used to stop the audible alarm.
Sensitivity Adjustment Range 26 KΩ ~ 580 KΩ
Detection of Pure Water Yes, 2uS/cm
Water Leakage Alarm Yes, 1 Sec ( Built-in Buzzer)
Relay Output for Water Leakage Alarm
Channels 1
Form C Relay 0.5 A @ 125 VAC
2 A @ 30 VDC
 
System Specifications
Communication
Interface RS-485
Format N,8,1 / O,8,1 / E,8,1 / N,8,2
Baud Rate Software Configuration: 1200 ~ 115200 bps
Protocol Modbus RTU or DCON
Node Addresses 96 ~ 127 for hardware configuration
0 ~ 255 for software configuration
LED Indicators
LED Indicators 1 as Power Indicator. 1 as Alarm Indicator.
EMS Protection
ESD (IEC 61000-4-2) ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power
Power
Reverse Polarity Protection Yes
Input Voltage Range 10 to 30 VDC
Consumption 1.5 W Max.
Mechanical
Dimensions (W x L x H) 83 mm x 70 mm x 29 mm
Installation DIN-Rail
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing

 

Technical

iSN-101 Liquid Leak Detection Unit Datasheet

Applications

The iSN-101 is a leakage detection module used in water pipe leak monitoring in buildings with two working modes.
1. Work with the water sense cable that installed near the possible leaking pipe or area to detect leakage with alarm.
2. Work with the water leakage probe that installed in fixed possible leak locations to detect.
The leakage monitoring is applied to the water pipes, fire pipes and sewage pipes of buildings, as well as the detecting of domestic water, drainage and electric equipment, which can effectively achieve water saving and ensure the safety of living. The iSN-101 can detect leakages, send out signal and alarms, combine with the WISE IoT Edge Controller or TPD/VPD Touch HMI, and to further integrate with the mobile APP or community system.

iSN-101 Liquid Detect Application
iSN-101 Liquid Detect Application 2

Recently Viewed Products