To give you the best experience we use cookies. Learn More

OK

100% Guarantee
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

SCG-652 Series Split-core Current Transducer Up To 200A, 4-20mA Op

SCG-652 Series Split-core Current Transducer up to 200A, 4-20mA op
£6500

(£78.00 incl VAT)
FREE delivery to UK on orders over £500

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:SCG-652

Description

These Solid-State Current Transducers convert a primary AC circuit current to a proportional Analog signal (4-20mA), which allows the Current Usage to be monitored by a wide range of Data Loggers plus Data Acquisition, SCADA and BMS Systems. They are used to monitor the current for Electrical loads such as pumps, conveyors, machines or fans.

The SCG-652 series of current sensors are loop powered to allow longer cable lengths to be used. The sensors are typically used to monitor motor operation and can be used to determine motor failure, belt loss, machine feed rates or tool wear. A plug-top power supply is available from under the Recommendations Tab.

The SCG-652 series are Split-core to allow for easy retro-fitting and are available in three variations (R1, R2 or 0-200A). 

R1 version = 0-20A, 0-40A, 0-60A
R2 version = 0-50A, 0-100A, 0-150A

IMPORTANT: Please specify the variant required in the comments section of your order.

Features

  • Split-core for easy retrofit
  • Compact Size
  • Loop Powered 
  • 4-20mA proportional Output
  • 3 Current Range options available:
    R1 version = 0-20A, 0-40A, 0-60A
    R2 version = 0-50A, 0-100A, 0-150A
    0-200A
  • 20mm diameter conductor hole

Specifications

  • Measurement Range: up to 200 Amps (Model Specific)
  • Maximum Input Current: 
    100 Amps for R1 models
    200 Amps for R2 model
    250 Amps for 200 Amp model 
  • Accuracy: ± 1% FSO (5-100% of range)
  • Signal Output: 4-20mA 
  • Sensor Power: 15 to 30 Vdc - Loop -powered
  • Insulation Class: 600 Vac, insulated conductors
  • Frequency: 50/60 Hz
  • Response Time: 200 mS Typical, 0-90 % 
  • Output Load: 250 Ω typical - >600 Ω Max. @ 24 Vdc  
  • Operating Temperature:  -15 to 50 °C  (5 to 122 °F)
  • Operating Humidity: 5 to 90% RH non-condensing
  • Terminal Block: 14 to 22 AWG
  • Dimensions: 76 x 79 x 24.9 mm (3.0 x 3.1 x 0.98 in)
  • Sensor Aperture: 19 x 24 mm (0.8 in)
  • Enclosure Material: ABS/PC, UL94 V-0
  • Agency Approvals: cULus Listed

Applications

  • Energy Usage
  • Process monitoring
  • Monitoring Motor/machine wear to schedule maintenance/improve reliability

For a complete solution, please talk to us about our Orchestrator SCADA Monitoring software and Data Acquisition products.

Description

These Solid-State Current Transducers convert a primary AC circuit current to a proportional Analog signal (4-20mA), which allows the Current Usage to be monitored by a wide range of Data Loggers plus Data Acquisition, SCADA and BMS Systems. They are used to monitor the current for Electrical loads such as pumps, conveyors, machines or fans.

The SCG-652 series of current sensors are loop powered to allow longer cable lengths to be used. The sensors are typically used to monitor motor operation and can be used to determine motor failure, belt loss, machine feed rates or tool wear. A plug-top power supply is available from under the Recommendations Tab.

The SCG-652 series are Split-core to allow for easy retro-fitting and are available in three variations (R1, R2 or 0-200A). 

R1 version = 0-20A, 0-40A, 0-60A
R2 version = 0-50A, 0-100A, 0-150A

IMPORTANT: Please specify the variant required in the comments section of your order.

Features

Specifications

Technical

SCG Series Current Transducers Datasheet

Applications

For a complete solution, please talk to us about our Orchestrator SCADA Monitoring software and Data Acquisition products.

Recently Viewed Products