CSG-652 Series Solid-core Current Transducer Up To 200A, 4-20mA Op

Description

These Solid-State Current Transducers convert a primary AC circuit current to a proportional Analog signal (4-20mA), which allows the Current Usage to be monitored by a wide range of Data Loggers plus Data Acquisition, SCADA and BMS Systems. They are used to monitor the current for Electrical loads such as pumps, conveyors, machines or fans.

The CSG-652 series of current sensors are loop powered to allow longer cable lengths to be used. The sensors are typically used to monitor motor operation and can be used to determine motor failure, belt loss, machine feed rates or tool wear. A plug-top power supply is available from under the Recommendations Tab.

The CSG-652 series are Solid-core, which are ideal for new installations and they are available in three different models:

R1 : 0-10A, 0-20A, 0-50A
R2 : 0-50A, 0-100A, 0-150A
200: 0-200A
For retro-fit applications, please refer to the SCG-652 Split-core transducers.

IMPORTANT: Please specify the model required in the comments section of your order.

Features

• Solid-core for new installation
• Compact Size
• Loop Powered 
• 4-20mA proportional Output
• 3 Current Models available:
  0-10A } R1 Variant
  0-20A }
  0-50A }
  
  0-50A  } R2 Variant
  0-100A } 
  0-150A }
  
  0-200A
• 20mm diameter conductor hole

Specifications

• Measurement Range(Model Specific):   
  3 Current Models available:
  R1 Variant = 0-10A, 0-20A or 0-50A switch selectable
  R2 Variant = 0-50A, 0-100A or 0-150A switch selectable
  0-200A
• Maximum Input Current: 
  100 Amps for R1 model
  150 Amps for R2 model
  250 Amps for 200 Amp model 
• Accuracy: ± 1% FSO (5-100% of range)
• Signal Output: 4-20mA 
• Sensor Power: 15 to 30 Vdc - Loop -powered
• Insulation Class: 600 Vac, insulated conductors
• Frequency: 50/60 Hz
• Response Time: 200 mS Typical, 0-90 % 
• Output Load: 250 Ω typical - >600 Ω Max. @ 24 Vdc  
• Operating Temperature:  -15 to 50 °C  (5 to 122 °F)
• Operating Humidity: 5 to 90% RH non-condensing
• Terminal Block: 14 to 22 AWG
• Dimensions:   66 x 67.3 x 24.9mm
• Sensor Aperture:   20.3mm diam
• Enclosure Material: ABS/PC, UL94 V-0
• Agency Approvals: cULus Listed

Technical

CSG Series Current Transducers Datasheet

Applications

• Energy Usage
• Process monitoring
• Monitoring Motor/machine wear to schedule maintenance/improve reliability

For a complete solution, please talk to us about our Orchestrator SCADA Monitoring software and Data Acquisition products.