IButton DS1925L Thermochron Data Logger (-40 To +85'C) -ext Mem

Description

The iButton® temperature logger (DS1925) is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 122K 8-bit readings or 61K 16-bit readings taken at equidistant intervals ranging from 5min to 273hrs can be stored. In addition, there are 512 bytes of nonvolatile memory for storing application-specific information. A mission to collect data can be programmed to begin immediately, after a user-defined delay, or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1925 is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1925 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1925 to be mounted on almost any object, including containers, pallets, and bags.

NOTE: Requires Software and adapter cable to communicate.

Features

• Provides High-Quality Temperature Exposure Assessment of an End Product
• Temperature Measurement Accuracy of ±0.5°C
• Storage for Up to 125,440 Timestamped Values
• Flexibility to Monitor and Data-Log Long Duration Exposures with Short-Duration Time Intervals
• Unique Factory-Lasered 64-Bit Serial Number Ensures Absolute Traceability Because No Two Parts Are Alike
• Highly Configurable Options for Data Logging and Security
• Programmable Sample Rates from 5min to 273hrs
• Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
• Two-Level Password Protection of All Memory and Configuration Registers
• Measure and Report Internal Battery Level and Output-Logged Data if a Battery is Depleted
• Physically Robust, Operationally Efficient
• Durable Stainless-Steel Enclosure Withstands Harsh Environments and Conditions
• Communicates to a Host System with the SingleContact 1-Wire Interface
• -40°C to +85°C Operating Temperature Range

Specifications

• Memory Type: NVSRAM
• Memory Size: 512 bytes
• Data Logger Size: 125,440 byte
• Data Logger Sample Rate: 5min to 273 hours
• Data Logger Accuracy: correctible to +/- 0.5°C
• Data Logger Resolution: Selectable
  8-bit or 16-bit (16 bit allows 61k values to be stored)
• Measurement Range: -40 to +85°C
• Thermal Response time: up to 130 seconds 
• Security Features: password protected
• Programmable Alarm: Temperature High/Low
• Real Time Clock: Yes
• RTC Accuracy: depends on temperature, @ 20’C drift ~ 1 minute/month.
• Weight: 3.3g
• Size: diameter 17.35 x 5.9mm
• IP Rating: IP56
• Battery Life: depends on number of factors such as Temperature and Logging rate. 
  E.g. 8-bit logging @ 20’C at 30 second intervals, the battery should last around 300 days. Record every 10 minutes in 8-bit mode @ 20’C, the battery should last around 5.5 years

Technical

i-button datalogger catalogue