This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

I-7014D Analog Transmitter Input W/ LED Display

I-7014D Analog Transmitter Input w/ LED display
£20500

(£246.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:I-7014D

Description

This Analog Transmitter Input module is ideal where only a single Input from a 2-wire Transmitter needs to be monitored e.g. a sensor with a DC Voltage (0-10V, 0-5V) or DC current (4-20mA) output.

 

The I-7014D unit is basically a I-7012D module with Linear Mapping Support and +15V power loop for the Transmitter. It also includes a 4½ digit LED Display for value read-outs.

 

It also has an integral Digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which are useful for Alarm Output.

Features

  • 16 bit ADC
  • LED value display
  • 15V loop power for the sensor transmitter
  • 3000V dc inter module isolation
  • Integrated digital input and output
  • Event counters
  • Autonomous alarm output
  • Direct measurement of voltage and current
  • Can be Configured using simple ASCII Commands

Specifications

Analog Input

  • Resolution: 16 bits
  • No of inputs: 1 for Voltage, 1 for current
  • Input Type: DC voltage, 0-20mA
  • Sampling Rate: 10 samples/sec (normal mode)
  • Input Ranges: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA 
  • Accuracy : +/-0.05% or better
  • Common Mode Rejection : 86dB
  • Isolated Loop Power/Excitation Voltage: +15Vdc @ 30mA
  • Add Input Impedance : Voltage Input = 30k ohms
    Current Input = 125 ohms
  • Over voltage protection : +/- 10V

Digital Input

  • Channels = 1
  • Logic 0 = +1V max
  • Logic 1 = +3.5V to +30V
  • Max. Input Frequency = 50Hz
  • Min. Pulse Width = 1ms

Digital Output

  • Channels = 2
  • Output Type = Sink, Open collector to 30V
  • Output Load = 30mA max. per channel
  • Power Dissipation = 300mW

Other

  • Interface = RS485
  • Format : N,8,1
  • Baud Rate : 1200 - 115200 bps
  • LED Display = Power/Comms indicator + 4 ½ Digit Display
  • Power Input = +10V to +30V dc
  • Power Consumption = 1.9W
  • Operating Temp. = -25 to +75°C
  • Storage Temp. = -40 to +85°C
  • Humidity = 5 to 95%, non-condensing

Technical

User Manual

Description

This Analog Transmitter Input module is ideal where only a single Input from a 2-wire Transmitter needs to be monitored e.g. a sensor with a DC Voltage (0-10V, 0-5V) or DC current (4-20mA) output.

 

The I-7014D unit is basically a I-7012D module with Linear Mapping Support and +15V power loop for the Transmitter. It also includes a 4½ digit LED Display for value read-outs.

 

It also has an integral Digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which are useful for Alarm Output.

Features

Specifications

Analog Input

Digital Input

Digital Output

Other

Technical

User Manual

Recently Viewed Products