(£228.00 incl VAT)
FREE delivery to UK on orders over £100
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
The M-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems.
PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application.
The 8 Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be configured via software.
Also available is the M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8 PWM (Pulse Width Modulation) output channels and the 8 high-speed counter channels. Please contact us for more information.
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Memory | |
|---|---|
| Battery Backup | Yes |
| Isolation | |
|---|---|
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal |
| LED Indicators | |
|---|---|
| Status | 1 x Power and Communication |
| PWM | |
|---|---|
| Channels | 8 |
| Type | TTL |
| Sink/Source (NPN/PNP) | Sink, Source |
| Load Voltage | +5 VDC |
| Load Current |
Sink: 10 mA @ 5V /Channel Source: 1 mA @ 5V /Channel |
| Frequency | 1 Hz ~ 500 KHz |
| Duty Cycle | 0.1 to 99.9 % |
| Mode | Burst, Continuous |
| Burst Count | 1 to 65535 |
| Trigger Start | Hardware or Software |
| Counter/Frequency/Encoder Input | |
|---|---|
| Channels | 8 |
| Type | Counter |
| Sink/Source (NPN/PNP) | Sink |
| Counter/Encoder Bits | 32-bit |
| ON Voltage Level | +3.5 ~ +5 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Counter Mode | Up |
| Max. Speed | 1 MHz |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
| Protocol | Modbus RTU, DCON |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 2.9 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 123 x 72 x 35 (W x L x H) |
| Installation | DIN-Rail |
| Environmental | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
The M-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems.
PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application.
The 8 Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be configured via software.
Also available is the M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8 PWM (Pulse Width Modulation) output channels and the 8 high-speed counter channels. Please contact us for more information.
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Memory | |
|---|---|
| Battery Backup | Yes |
| Isolation | |
|---|---|
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal |
| LED Indicators | |
|---|---|
| Status | 1 x Power and Communication |
| PWM | |
|---|---|
| Channels | 8 |
| Type | TTL |
| Sink/Source (NPN/PNP) | Sink, Source |
| Load Voltage | +5 VDC |
| Load Current |
Sink: 10 mA @ 5V /Channel Source: 1 mA @ 5V /Channel |
| Frequency | 1 Hz ~ 500 KHz |
| Duty Cycle | 0.1 to 99.9 % |
| Mode | Burst, Continuous |
| Burst Count | 1 to 65535 |
| Trigger Start | Hardware or Software |
| Counter/Frequency/Encoder Input | |
|---|---|
| Channels | 8 |
| Type | Counter |
| Sink/Source (NPN/PNP) | Sink |
| Counter/Encoder Bits | 32-bit |
| ON Voltage Level | +3.5 ~ +5 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Counter Mode | Up |
| Max. Speed | 1 MHz |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
| Protocol | Modbus RTU, DCON |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 2.9 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 123 x 72 x 35 (W x L x H) |
| Installation | DIN-Rail |
| Environmental | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
