This site uses cookiesX
100% Guarantee & Free Delivery
View Cart (0)
0800 048 1057
0800 048 1057
Menu ▼

INet-R-350 Precision Resistors 350 Ohm Pack Of 8

iNet-R-350 Precision Resistors 350 Ohm Pack of 8
£6500

(£78.00 incl VAT)
FREE delivery to UK on orders over £100

100% Money Back
30 Day Guarantee

International Shipping
Over 100 Countries

Model:iNet-R-350

Description

Several sensor types require external, end user installed shunt resistors to complete a circuit. These external resistors are used with current measurement, resistance measurement, thermistor measurement, RTD measurement, ¼ bridge strain gauges, and ½ bridge strain gauges. Several values of these Highly precise and stable resistors are available, dependant on the sensor requirements. They are supplied in a pack of 8.

Features

  •  ≤ ±0.05% initial accuracy error;
    e.g. 10K Ω resistor shipped from factory is between 9,995 and 10,005 Ω at 23°C
  • ≤ 5ppm/C max temperature drift;
    e.g. 10K Ω resistor changes ≤ ± 0.5 Ω after its body changes 10°C
  • 0.125 Watts maximum power dissipation @ 70°C before permanent damage; i.e. voltage across resistor times current (Amps) through resistor must be < .125
  • 300V maximum voltage across resistor before permanent damage
  • 0.1" diameter x 0.25" length
    (2.5mm dia x 6.3mm length)
  • RoHS compliant (little or no lead)

Specifications

  • ≤ ±0.01% error from extreme short time overload (i.e. > .125Watts for short duration, Mil 10509-4.6.6)
  • ≤ ±0.02% error from extreme thermal shock (i.e. very fast temperature change, Mil 202-107, -55°C to 85°C)
  • ≤ ±0.04% error from running at full 0.125W power for 40days at 85°C (Mil 55182-4.7.17)
  • ≤ ±0.08% error from extreme moisture and temperature cycling (Mil 202-106)
  • ≥ 100M Ω minimum resistance between outter surface of resistor and internal signal
  • -55°C to +150°C device temperature range before permanent damage

Description

Several sensor types require external, end user installed shunt resistors to complete a circuit. These external resistors are used with current measurement, resistance measurement, thermistor measurement, RTD measurement, ¼ bridge strain gauges, and ½ bridge strain gauges. Several values of these Highly precise and stable resistors are available, dependant on the sensor requirements. They are supplied in a pack of 8.

Features

Specifications

Recently Viewed Products