Various Accessory Items
126 Products
Sort Order
125Ω Precision Resistor (0.1%) to be used for current measurement.
Plug-in 10-Way Screw Terminal Block for M/I-7000 range products. 5.08mm pitch.
Angled (90°) mounting for radar sensor [1,5m x 1,5m]
Right-angle Mounting bracket for AquaLogger RDR
Horizontal Mounting bracket for AquaLogger RDR
Enclosure Open/Close sensor option for Aqualogger
External GSM Antenna for use with the AquaLogger Compact
Prefabricated foundation for angled (90°) mounting for radar sensor
Horizontal mounting for radar sensor [1m]
Upgrade of the AquaLogger Compact enclosure to IP68 rating
180° Hold Down Clips for iSN-101 Liquid Leak Detection Module cable. Pack of 50
90° Hold Down Clips for iSN-101 Liquid Leak Detection Module cable. Pack of 50
Flexible boots to mount the HOBO Pendant MX2201 and MX2202 loggers to non-flat surfaces such as rebar or posts.Pack of 5
Serial Cable - 9 way D-type Female connector to 3 terminated wires for RS232 communication
![CA-0915 RS232 DB9 Male to DB9 Female Cable [RS-232: Pin1-Pin9], 1.5M](https://www.measurementsystems.co.uk/images/products/results/ca-0915-rs232-db9-male-to-db9-female-cable--rs-232--pin1-pin9---1.5m.jpg)
Serial Cable 9-pin D-type Male to Female, 1.5m. all pins wired straight through
![CA-0920 RS232 DB9 Male to DB9 Male Cable [Pin1-Pin9], 2M](https://www.measurementsystems.co.uk/images/products/results/ca-0920-rs232-db9-male-to-db9-male-cable--pin1-pin9---2m.jpg)
Serial Cable 9-pin D-type Male to Male, 2m. all pins wired straight through
DB37 Male to Female, with Molded Cable, 45º, 1M
37-pin Male D-sub connector with plastic cover. Connector for PCI-DIO/PISO-DIO Series
1m Water Sense Cable with break detect, extendable, for iSN-101/4
3m Water Sense Cable for iSN-101 Liquid Leak Detection Module
10m Water Sense Cable for iSN-101 Liquid Leak Detection Module
30m Water Sense Cable for iSN-101 Liquid Leak Detection Module
50m Water Sense Cable for iSN-101 Liquid Leak Detection Module
1m Water sensor cable for the iSN-101 and iSN-104 modules, with break detection. Extendable.
3m Water sensor cable for the iSN-101 and iSN-104 modules, with break detection. Extendable.
10m Water sensor cable for the iSN-101 and iSN-104 modules, with break detection. Extendable.
30m Water sensor cable for the iSN-101 and iSN-104 modules, with break detection. Extendable.
Plug-in termination resistor for DC100X Series Water rope detection cables (for iSN-101/4 units)
Leakage probe for iSN-101 Liquid Leak Detection Module cable.
3m Leader Cable for iSN-101 Liquid Leak Detection Module
Ethernet extension cable to help with cable routing with the CL-200 series Sensor/Data logger devices
Weather-resistant enclosure for mounting the HOBO UX120-014M data logger
Split core CT 400A primary, 5A secondary
DASYLab Basic includes all drivers, all standard modules (except Signal Analysis and Actions), and one Layout Window
DASYLab Lite includes all drivers, comes without analysis, limited module count, and includes one Layout Window
DASYLab Pro includes all drivers, DASYLab Full version, plus all add-on modules (without third-party modules)
DASYLab Pro includes all drivers, DASYLab Full version, plus all add-on modules (without third-party modules). Annual Subscription.Create complex applications in minimal time without programming Lets you build worksheets using graphical functions Implements real-time operations, including PID control Provides standard real-time displ...
DASYLab Development versions are licensed for use on a single computer. The DASYLab Runtime license allows you to run an existing worksheet application on an additional computer (with compatible hardware configurations).
DASYLab upgrade to the latest Full license
DB-1820 Daughter board for I/O modules
Voltage Attenuator and Current Transformer series for AC/DC input. 100V & 200A .
Voltage Attenuator and Current Transformer series for AC/DC input. 100V & 500A .
Voltage Attenuator and Current Transformer series for AC/DC input. 100V & 50A .
Voltage Attenuator and Current Transformer series for AC/DC input. 600V & 50A .
4-channel 200A Current Transformer series for AC/DC input.
4-channel 500A Current Transformer series for AC/DC input.
4-channel 50A Current Transformer series for AC/DC input.
8 channel +/-10V attenuator for AC or DC Voltages. +/- 10V output. Isolated
8 channel +/-150V attenuator for AC or DC Voltages. +/- 10V output. Isolated
8 channel +/-80V attenuator for AC or DC Voltages. +/- 10V output. Isolated
External Wall Box for CL-200 series
External Wall Box for TPD-703/TPD-703-64 series
Simple Data Logging Package for use with DCON and Modbus Based products.
Replaceable Filter Patch (Circle) (1 Pack 4 Patches) Size: (OD :16，ID:12)mm
Radar Water Level sensor with 0-8m range and 4-20mA output for use with AquaLogger Remote monitoring solution..
Replacement carbon monoxide and nitrogen dioxide sensor pods for the GDT Series Gas Detection Sensor
Audible Buzzer and LED Strobe Alarm indicators for GDT series of Carbon Monoxide/Nitrogen Dioxide Sensors
2 - PVC pick-up ports and 2000mm PVC tubing
Install Kit for Differential Air Pressure Sensors 2 - PVC pick-up ports & 2000mm PVC tubing
5 pack of replacement grommets for use with MX2001 Water Level loggers, deployed in high-humidity 2-inch wells.
Single Relay option for CD2, CDD4, CDD5, CHTDT series CO2 sensors; GDT Carbon Monoxide/NO2 Sensor; CMD5B CO Sensor, GH2/3 Horticulture Sensors (option only - also need to order the Sensor itself).
Modbus RTU option for CMD1 Sensor
ModbusRTU or BACNet MS/TP Output option for the CR3A or CR3B CleanRoom Sensors
Suspension Mount option for GH Series Horticulture sensors, includes cable winder
Remote Antenna and 3m cable for the GWBU Wireless system base unit
IP66 Rated enclosure suitable for one or two I-7000 size modules.
Magnetic Base for iSN-701 series
Magnetic Base for iSN-703 series
Integrated Static Probe option for LP3 Air Pressure Sensors.
T-shape meteorological mast with all sensor and cabinet mountings [2m height]
Mast base with 4 legs, suitable for use with the 2m Mast Kit. Adjustable feet.
A plastic-bodied replacement electrode for the HOBO MX2501 pH and Temperature Data Logger.
Anti-Biofouling Copper Guard for MX2501 pH/Temperature data logger
Includes the Calibration Kit (MX2500-CAL-KIT) and the Electrode Storage Solution (MX2500-STORE-SOLN).
Outlet Box for TPD-703/TPD-703-64 Devices
Annual Hosting for PMEcology Logging System (Weather & Water Level)
30W Solar PV Panel with Mast Mounting. For use with MicroPower Data Logger/Weather station.
5W Solar PV Panel. For use with MicroPower Data Logger/Weather station.
Mast for mounting Rain Gauge Sensor (1m)
Solar Radiation Shield for SRH1A Temperature/Humidity Sensor
The S512 is a 512k battery backup SRAM Module for all i-8000 Embedded Controller and can fit into the I-8000 controller backplane or into an I-8072 Printer/Xsocket module. The S512 can provide 10,000 hours backup
Temperature sensor for MX1104/5 data loggers. Suitable for Pipe mounting.
Ultrasonic Wind speed and direction sensor for use with the MicroPower weather station
RS232 Communication Cable (2m long) with DB9 D-sub connectors at each end
Analog Output Anemometer for MicroPower Weather Station.
Plug-top Power Supply for sensors, providing 24Vdc
Rain Collector - entry level for Micropower Weather Station
Professional Rain Sensor with High accuracy and up to 0.001mm resolution. Heated. Multiple Output interfaces.
Professional Rain Sensor with 0.1mm resolution, unheated
Professional Rain Sensor with 0.1mm resolution, heated
The ANT-8 Omni-Directional Antenna allows the distance between 2off SST2450 Radio Modems to be extended upto 2km.
The ANT-15 Omni-Directional Antenna allows the distance between 2off SST2450 Radio Modems to be extended upto 9km.
18 dBi, 2.4 GHz directional panel antennna with 1M cable (RP-SMA Male Plug)
UK Plugtop Power Supply Unit with 12V Voltage output.
100A Split-Core Current Transformer with 5A secondary, for use with Power Meters.
External Wall Box for TPD-280/TPD-280U/TPD-283 Devices
Wall Mounting Box for use with TPD-430/TPD-433 TouchPad HMI displays
LCD Display option for Wall Mount CO Sensor
Outlet Box for TPD-280/TPD-280U/TPD-283/TPD-430 Devices
Temperature Sensor, NTC. -50 to +70'C, 1m cable
The ANT-421 is a GPRS/GSM/2G/3G/4G Antenna with Mag-mount base (1.5m cable). This can be used in place of the standard antenna's supplied with the M2M series of products such as the GT-540, WISE-5231M-3GWA etc.
250A Split-Core Current Transformer with 5A secondary, for use with Power Meters.
Modbus or BACNet Output option for the GDT Carbon Monoxide (CO) Sensors
500A Split-Core Current Transformer with 5A secondary, for use with Power Meters.
LCD Display option for Duct Mount CO Sensor
1kA Split-Core Current Transformer with 5A secondary, for use with Power Meters.
2kA Split-Core Current Transformer with 5A secondary, for use with Power Meters.
3kA Split-Core Current Transformer with 5A secondary, for use with Power Meters.
Siren/3-colour Ultra-bright LED Alarm unit, Modbus TCP Protocol, Power-over-Ethernet capable, 1 Dig IP, 1 Dig OP, IP43 case
Liquid Leak Detection Module (wall mount), Modbus RTU communication. Includes an iSN-101 Module, a 1m Liquid Leak Detection Cable and 3m Extended Cable.
Liquid Leak Detection Module (DIN-Rail mount), Modbus RTU communication. Includes an iSN-101/DIN Module, a 1m Liquid Leak Detection Cable and 3m Extended Cable.
Liquid Leak Detection Module (wall mount), Modbus RTU communication. Includes an iSN-101 Module, a 3m Liquid Leak Detection Cable and 3m Extended Cable + clips.
Liquid Leak Detection Module (wall mount), Modbus RTU communication. Includes an iSN-101/DIN Module, a 3m Liquid Leak Detection Cable and 3m Extended Cable + clips.
Liquid Leak Detection Module (wall mount), Modbus RTU communication. Includes an iSN-101 Module and a Leakage Probe.
Liquid Leak Detection Module (wall mount), Modbus RTU communication. Includes an iSN-101/DIN Module and a Leakage Probe.
Audible/Visual Alarm Annunciator - Single channel
Audible/Visual Alarm Annunciator - Dual channel
Audible/Visual Alarm Annunciator - Quad channel
