In order to reduce wiring and conveniently manage data acquisition modules, ICPDAS provide a range of RF I/O modules to meet this requirement.

The hardware structure is based on the ICPCON i-87K series module and the software supports the ICPDAS DCON & Modbus protocol, making it easy to integrate into any system. Thus it supports the full range of I-87K plug-in I/O modules.

There are two RF I/O series modules currently available: RF-87K1 and the RF-87K2. The last character of the model number denotes the number of slots.

The RF-87K series is based on a direct sequence spread spectrum and RF technology, operating in the ISM bands with a Frequency Range of 2410.496MHz~2471.936MHz, with a Channel Spacing of 4.096MHz.

By changing the default antenna to a high gain antenna, the transmission range of the RF-87K series can be extended. In addition, the unique specifications of the RF-87K series allow the channel to be changed by simply using the switch, meaning that most configuration problems can be easily solved when adding a new module. It is also easy to add an RF-87K series module to your existing SST-2450 network.

These products are DIN rail-mountable and have frame ground for easy installation and safety. In order to simplify the complicated setting up processes during the installation of wireless products, most configurations are satisfied by the default values and only the communication channel requires selection. You can quickly switch to a different channel if a communication conflict exists between your device and other's wireless devices. Many distribution systems need long distance communication, such as the water treatment systems, traffic light control systems, irrigation systems etc. We provide many accessories to increase the transmission range for such applications.