PCI Bus Digital I/O Cards

PCI-P16C16 16Ch Isolated Digital IP,16Ch Open Collector OP Board

The PCI-P16C16 provides 16 optically isolated inputs and 16 open collector outputs. It has one 37-pin D-Sub connector and one 40-pin header. It can be installed in a 5V PCI slot and supports "Plug & Play".

The PCI-P16C16 can be used in various applications including load switching, external switching, contact closure and others.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PCI-P16POR16 16Ch Isolated Dig IP, 16Ch PhotoMOS Relay OP Board

The PCI-P16POR16 provides 16 optically isolated inputs and 16 PhotoMOS Relay outputs. It has one 37-pin D-Sub connector and one 40-pin header. It can be installed in a 5V PCI slot and supports "Plug & Play".

The PCI-P16POR16 can be used in various applications including load switching, external switching, contact closure and others.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PCI-P16R16 16Ch Isolated Digital IP, 16Ch Form C Relay OP Board

The PCI-P16R16 provides 16 optically isolated inputs and 16 electro-mechanical Relay outputs (8x Form C - SPDT, 8x Form A - SPST). It has one 37-pin D-Sub connector and one 40-pin header. It can be installed in a 5V PCI slot and supports "Plug & Play".

The PCI-P16R16 can be used in various applications including load switching, external switching, contact closure and others.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PCI-P8R8 8Ch Isolated Digital IP, 8Ch Form C Relay Output Board

The PCI-P8R8 provides 8 optically isolated inputs and 8 electro-mechanical Relay outputs (4x Form C - SPDT, 4x Form A - SPST). It has one 37-pin D-Sub connector, can be installed in a 5V PCI slot and can support "Plug & Play".

The PCI-P8R8 can be used in various applications including load switching, external switching, contact closure and others.

Includes one CA-4002 D-Sub connector. 

PCI-TMC12A 12-channel Counter/Timer + Dig I/O Board

The PCI-TMC12A is a PCI-Bus general purpose counter/timer and digital I/O board.

It provides tweleve channels of 16-bit counter/timer. Two internal clock sources (8M / 1.6M and 0.8M / 80K) are selected by jumper. Four 8254 chips provide a variety of powerful counter / timer function modes to match your industrial and laboratory applications.

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

Includes one CA-4002 D-Sub connector. 

PIO-D144U 144-channel OPTO-22 Digital IO Board (UniversalPCI)

The PIO-D144 provides 144 TTL digital I/O lines, consisting of eighteen 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D144 has one D-Sub connector and five 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis. 

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots. 

PIO-D168 168-channel OPTO-22 Digital IO Board

The PIO-D168 provides 168 TTL digital I/O lines, consisting of  twenty-one 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D168 has one D-Sub connector and six 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis. 

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

PIO-D24U 24-channel Digital IO Board (universal PCI)

The PIO-D24 provides 24 TTL digital I/O lines, consisting of three 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D24 has one D-Sub connector

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.  

PIO-D48U 48-channel OPTO-22 Digital IO Board Universal PCI

The PIO-D48 provides 48 TTL digital I/O lines, consisting of six 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D48 has one D-Sub connector and one 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis. 

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.   

PIO-D56U 56-channel Digital IO Board Universal PCI

The PIO-D56 provides 24-bit bi-direction digital I/O and 16-bit digital inputs and 16-bit digital outputs. The 24-bit bi-direction digital I/O use 37-pin D-sub connector. The 16-bit digital I/O use 2off 20-pin header.

The 24-bit bi-direction digital I/O, consist of three 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.   

PIO-D64U 64-channel Digital IO Board with Timer/Counter UPCI

The PIO-D64 provides 32 digital input channels, 32 output channels and 6 counter/ timer channels.  The board consists of two 16-bit input ports and two 16-bit output ports. 

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.

PIO-D96 96-channel OPTO-22 Digital IO Board

The PIO-D96 provides 96 TTL digital I/O lines, consisting of twelve 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D96 has one D-Sub connector and three 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis. 

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

PISO-A64 64Ch Isolated OC Digital Output Board(current sourcing)

The PISO-A64 is designed for use in PCI-Bus computers. The PISO-A64 has 64 channels of optically isolated digital outputs (current sourcing), arranged into four isolated banks.

Each digital output offers a PNP transistor and integral suppression diode for inductive load. All isolated output channels are designed into group A, B, C and group D. The power supply for the output port should use the external power. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-A64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB37 flat cable is used to fix with the PC rear panel. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 input channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PISO-C64 64Ch Isolated OC Digital Output Board(current sinking)

The PISO-C64 has 64-channel of optically isolated digital outputs (current sinking), arranged into two isolated banks.

Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC/AT/XT. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-C64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB37 flat cable is used to fix with the PC rear panel. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 input channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PISO-P16R16E PCI-e 16Ch Isolated Digital IP, 16Ch Relay OP Board

The PISO-P16R16E is a PCI Express card, which supports PCI-Express bus. It provides 16 optically isolated (3750V) digital inputs and 16 relay outputs.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors

PISO-P32A32 64Ch Isolated Digital I/O Board (current sourcing)

The PISO-P32A32 has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks.

Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a PNP transistor and integral suppression diode for inductive load. Isolated input channels 0-15 are designed into group A and channels 16-31 are designed into group B. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or internal power. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-P32A32 has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable includes a PC Rear Panel plate. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PISO-P32C32 64Ch Isolated Digital I/O Board (current sinking)

The PISO-P32C32 has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks.

Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated input channels 0-15 are designed into group A and channels 16-31 are designed into group B. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-P32C32 has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable includes a PC Rear Panel plate. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors

PISO-P64 64Ch Isolated Digital Input Board

The PISO-P64 has 64 channels of optically isolated digital inputs, arranged into four banks.

Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Isolated input channels 0-15 are designed into group A, channels 16-31 are designed into group B, channels 32-47 are designed into group C and channels 48-63 are designed into group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-P64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB37 flat cable is used to fix with the PC rear panel. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 input channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PISO-P8R8 8Ch Isolated Digital IP, 8Ch Form A Relay Output Board

The PISO-P8R8 provides 8 optically isolated inputs and 8 electro-mechanical Relay outputs (Form A - SPST). It has one 37-pin D-Sub connector and can be installed in a 5V PCI slot while supporting "Plug & Play".

The PISO-P8R8 can be used in various applications including load switching, external switch or voltage sensing, contact closure and others.

Includes one CA-4002 D-Sub connector.

NOTE: Compared to PCI-P8R8, the PISO-P8R8 has all form A relays rather than 50/50 Form A/FormC with higher current output rating on a shorter PCB.  

PISO-P8SSR8AC 8Ch Isolated Dig IP, 8Ch SSR-AC Relay Output Board

The PISO-P8SSR8AC provides 8 optically isolated inputs and 8 AC-type Solid State Relay outputs. It has one 37-pin D-Sub connector and can be installed in a 5V PCI slot while supporting "Plug & Play".

The PISO-P8SSR8AC can be used in various applications including load switching, external switch or voltage sensing, contact closure and others.

Includes one CA-4002 D-Sub connector.