EP306 Thermocouple Pod Measurement Systems

EP306 Thermocouple Pod

£111.00

A compact signal conditioner for use with an e-corder unit enabling continuous monitoring and recording from K & T type thermocouple probes. It can also be sued in offset mode to monitor small variations around a fixed temperature.

The thermocouple pod can be used with most K & T type thermocouples. Suitable Thermocouple probes include:

ET405 K-type thermocouple probe
ET1400 T-type thermocouple probe (+/-0.1C accuracy between 0 and 50C)

Quantity:

Features

Plug and play installation with e-corder units

Use with K or T type thermocouple probe

-270C to +485C (K-type)

-270C to +385C (T-type)

Offset mode for relative measurements

raw signal corresponds to NIST ITS-90 thermoelectric emf values for easy calibration.

Specifications

Range: -270 to 385ºC (T-type probe) 485ºC (K-type)

Extent at Offset: -50 to 385ºC (T-type probe) or 485ºC (K-type)

Ranges with Offset: +/- 1, 2, 5, 12, 25 ºC

Accuracy : 0.1%

Gain : x100

for full specifications, please refer to the datasheet (under technical tab)

Technical

E-corder Brochure
E-corder Product Guide
EP306 Datasheet

Applications

The pod can be used as a general purpose laboratory thermometer for both research and teaching use including melting and boiling point determinations measurements of heats of reaction and calorimetric kinetic experiments.