NS-200FCS Unmanaged 1-port Industrial Ethernet Switch with FX Fibre Switch

NS-200FCS 1 port Ethernet + Fibre Switch (SC) - 15km

£196.00

The NS-200FCS is an Ethernet(10/100Base-TX) to Fibre Optics(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.

The NS-200FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fibre cables.

It contains a "soft start" function with overload and high-low voltage protection.

The width of the NS-200FCS is just 32.30 mm, so it can be used where space is at a premium.

NS-200FCS Media Converter Application

NS-200FCS 1 port Ethernet + Fibre Switch (SC) - 15km

Quantity:

Features

Automatic MDI / MDI-X crossover for plug-and-play

Each port supports both 10/100 Mbps speed auto negotiation

Store-and-forward architecture

Full duplex IEEE 802.3x and half duplex backpressure flow control

1.4 Gbps high performance memory bandwidth.

Integrated look-up engine with dedicated 1K unicast MAC addresses.

Supports +10 ~ +30Vdc voltage
Reverse Polarity Protection

Supports operating temperatures from 0 ~ +70°C

DIN Rail Mounting for Industrial use

Specifications

Technology

Standards : IEEE802.3, 802.3u, 802.3x

Processing Type : Store & forward wire speed switching - no delays

MAC Addresses : 1024

Memory Bandwidth : 1.4Gbps

Flow Control : IEEE802.3x flow control, back pressure flow control

Interface

RJ45 Ports : 10/100 Base-T(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection

Fibre Optic Port : 100 Base-FX (Single-mode; SC Connector)

LED Indicators : 10/100M, Link/Act, Full/Half Duplex (Fibre Port)

Ethernet isolation : 1500 Vrms 1 minute

Frame Ground for EMS Protection : Yes

Fibre Optic : Single-mode fibre cables : 8.3/125, 8.7/125, 9/125 or 10/125µm
Distance : 15km (9/125µm recommended) for full duplex
Wavelength : 1300 or 1310 nm
Min. Tx Output : -15 dBm
Max. Tx Output : -8 dBm
Rx Sensitivity : -36 to -31 dBm

Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm

Power

Input Voltage : +10 ~ +30VDC (non-isolation)

Power Consumption : 0.12A@24VDC, +/- 5% arrowed with 100M Full duplex

LED Indicator : Yes

Protection : Power reverse polarity protection

Frame Ground for EMS Protection : Yes

Connection : 3-Pin Removable Terminal Block

Mechanical

Case : Plastic

Flammability : UL94V-0

Dimensions : 32.3mm x 99mm x 77.5mm (W x H x D)

Installation : DIN Rail Mount

Environmental

Operating Temperature : 0 to 70 °C

Storage Temperature : -20 to +85 °C

Ambient Relative Humidity : 10% to 90% non-condensing

Technical

User Manual

Recommendations

Power Supplies