Measurement Systems

I-8810 Embedded Controller - RS485 : Slave - 8 slot

£210.00

The I-8810 is an embedded serial I/O unit which uses DCON Protocol Firmware. A wide variety of I/O modules are available, such as analog input/output, digital input/output and counter/frequency modules.

Quantity:

Features

Supports the RS-232 or RS-485 communication interface.

Supports DCON communication protocol

Dual Bus designed to supports i-8K and i-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules

Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules

I/O configurable using DCON Utility

Firmware update-able via the RS-232 port

Firmware can automatically scan AI modules and then map an alarm to a DO module

Dual Watch Dog mechanism enable i-8000 system can work reliably under harsh environment

Ventilated housing designed to operate between –25°C to +75°C

DIN rail clips or Screw holes on each corner allow the control unit to be easily mounted

Frame Ground provides enhanced static protection (ESD) capability and ensures that the module is more reliable

Specifications

CPU

CPU : 80188,40MHz or compatible
SRAM : 256k
Flash Memory : 256k
EEPROM: 2k
Built-in Watchdog Timer : Yes

Communication Interface

COM0: Internal Communication with 87k modules
COM1: RS232 (to update firmware)
COM2: RS485
COM3: RS232/RS485

SMMI (Small Man Machine Interface)

5 digit LED Display
3 programmable LED indicators
4 push buttons

I/O Expansion Slots

8810 : 8 slots

Other

Dimensions : 354x110x75.5 mm
Operating Temp.: -25 to +75ºC
Storage Temp. : -30 to +85ºC
Humidity : 5~95%, non-condensing
Power Protection : Power reverse polarity protection
Power Input : +10V to +30V dc
Power Supply : 20W
Power Consumption : 5.1W

Technical

User Manual

Applications

Remote Data Acquisition and Control

Environment Monitoring

Power Management

Factory Automation

Recommendations

Communications Units (to connect to host computer if using RS485 Interface)
Power Supplies