I-7017F Analog Input Module (8 channel) Measurement Systems

I-7017F Analog Input Module (8 channel)

£118.00

This module provides 8 differential channels, capable of receiving data from sensors outputing Voltage or Current (via use of an external resistor) depending on the device mode selected.

Quantity:

Features

16 bit ADC (12-bit mode for fast speed)

3000V dc inter module isolation

Direct measurement of voltage and current

Can be Configured using simple ASCII Commands

Specifications

Analog Input

Input Channels: 8 differential (or 6 differential and 2 single- ended by jumper select)
Input Type: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V,
+/-20mA (requires optional external 125 ohm resistor)
Resolution: 16-bit(Normal Mode) / 12-bit(Fast Mode)
Sampling Rate: 10 Samples/ Second (Normal Mode) / 60 Samples (Fast Mode)
Accuracy: +/-0.1% (Normal Mode) / +/-0.5% (Fast Mode)
Band Width: 15.7Hz (Normal Mode) / 78.7Hz (Fast Mode)
Zero Drift: +/-20uV/°C
Span Drift: +/-25ppm/°C
Common Mode Rejection: 86dB min
Normal Mode Rejection: 100dB
Input Impedance: 20M Ohms
Over voltage Protection: +/-35V (P-P)
Photo-Isolation: 3750 Vrms
Intra-module Isolation, Field to Logic: 3000 Vdc

Others

Interface: RS-485
Format: N,8,1
Baud Rate: 1200 ~ 115200 bps
LED Display : 1 LED as Power/ Communication indicator
Power Input: +10 to +30 Vdc
Power Consumption : 1.3W
Operating temperature: -25 to 75°C
Storage temperature: -40 to 85°C
Humidity: 5 to 95%, non-condensing

Technical

User Manual

Applications

Voltage or Current Measurement

Recommendations

125 Ohm Resistor for Current Measurement

Communications Units (to connect to host computer)
Power Supplies