I-7014D Analog Transmitter Input w/ LED display Measurement Systems

I-7014D Analog Transmitter Input w/ LED display

£144.00

This Analog Transmitter Input module is ideal where only a single Input from a 2-wire Transmitter needs to be monitored e.g. some Gas or Temperature sensors.

The I-7014D unit is basically a I-7012D module with Linear Mapping Support and +15V power loop for the Transmitter. It also includes a 4½ digit LED Display for value read-outs.

It also has an integral Digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which are useful for Alarm Output.

I-7014D Analog Transmitter Input w/ LED display

Quantity:

Features

16 bit ADC

LED value display

3000V dc inter module isolation

Integrated digital input and output

Event counters

Autonomous alarm output

Direct measurement of voltage and current

Can be Configured using simple ASCII Commands

Specifications

Analog Input

Resolution: 16 bits
No of inputs: 1 for Voltage, 1 for current
Input Type: DC voltage, 0-20mA
Sampling Rate: 10 samples/sec (normal mode)
Input Ranges: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA (with optional 125R resistor)
Accuracy : +/-0.05% or better
Common Mode Rejection : 86dB
Isolated Loop Power/Excitation Voltage: +15Vdc @ 30mA
Add Input Impedance : Voltage Input = 30k ohms
Current Input = 125 ohms
Over voltage protection : +/- 10V

Digital Input

Channels = 1
Logic 0 = +1V max
Logic 1 = +3.5V to +30V
Max. Input Frequency = 50Hz
Min. Pulse Width = 1ms

Digital Output

Channels = 2
Output Type = Sink, Open collector to 30V
Output Load = 30mA max. per channel
Power Dissipation = 300mW

Other

Interface = RS485
Format : N,8,1
Baud Rate : 1200 - 115200 bps
LED Display = Power/Comms indicator + 4 ½ Digit Display
Power Input = +10V to +30V dc
Power Consumption = 1.9W
Operating Temp. = -25 to +75ºC
Storage Temp. = -40 to +85ºC
Humidity = 5 to 95%, non-condensing

Technical

User Manual

Applications

Single Point 2-wire Transmitter sensor Measurement

Recommendations

Communications Units (to connect to host computer)
Power Supplies