Measurement Systems - forefront of the data acquisition market
Username: Password: Buy On-Line   
Products
RS-405FCS 3 port Ethernet Ring + Dual Fibre Switch (SC) - 15km £449.00

The RS-405FCS series is a range of real-time redundant ring switches from ICPDAS. The RS-405FCS is a Redundant Ring Switch which has 3 Ethernet Ports (10/100 Base-T ) with 2 Fibre Optic Ports (100 Base-FX, SC Connector). The RS-405FCS operates at full duplex mode. In full duplex mode, the range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fibre cables.

They can be used for several different applications including:

  • Link-lose-backup in the industrial field application. The ring topology quickly provides an alternative path should a network node or cable segment fail.
  • A cost effective redundant ring Ethernet LAN can be configured by mixing RS-405FCS with other low cost unmanaged Ethernet Switches such as the NS-205/208 series
  • Ring Coupling : To join seperate ethernet rings together (such as over different floors or buildings).
Key features are:
  • The RS-405FCS series are equipped with 2 power inputs, which are redundant of each other.
  • The relay output facility can deliver a warning signal on power or link failure
  • Modbus/TCP protocol Supported : This allows the administrator of an Ethernet LAN, through SCADA software, to obtain information regarding the condition and individual port status of the RS-405FCS.

For further information, please refer to the brochure under the technical tab.
Quantity:     

Features

  • Plug and Play
  • Provide redundant path to Ethernet LAN
  • Support various ring Topologies
  • Real-time performance
  • Certified for harsh industrial environments
  • Support Modbus/TCP protocol to read port status
  • Relay output for link lose alarm
  • Support redundant power input
  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 3.2 Gbps high performance memory bandwidth.
  • Frame Buffer Memory : 512Kbit
  • Integrated look-up engine with dedicated 1K unicast MAC addresses.
  • Supports +10 ~ +30Vdc voltage
    Power failure alarm by Relay Output
  • Supports operating temperatures from 0 ~ +70°C
  • DIN Rail Mounting and screw hole for wall mounting kit
    		•

    Specifications

    Technology

  • Standards : IEEE 802.3, IEEE 802.3u, IEEE802.3x
  • Processing type: Store & forward wire speed switching - no relays
  • MAC Addresses supported : 1024
  • Memory Bandwidth : 3.2Gbps
  • Flow Control : IEEE802.3x flow control, back pressure flow control
  • Redundant Strategy: STP, Ring (ICPDAS)
  • Protocol: Modbus/RTU, Modbus/TCP, OPC, STP, Cyber Ring

    • Interface

  • RJ45 ports: 10/100BaseT(x) auto negotiation speed, F/H duplex mode and auto-MDI/MDIX connection.
  • Fibre Optics Port : 100 Base-FX (Multi-mode, SC Connector)
  • LED Indicators : 10/100M, Link/Act/Backup, Full/Half Duplex (Fibre Port)
  • Ethernet isolation : 1500 Vrms 1 minute
  • Frame Ground for EMS Protection : Yes
  • Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
    Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
  • Fibre Optic : Single-mode fibre cables : 8.3/125, 8.7/125, 9/125 or 10/125µm
                        Distance : 15km (9/125µm recommended) for full duplex
                        Wavelength : 1300 or 1310 nm
                        Min. Tx Output : -15 dBm
                        Max. Tx Output : -8 dBm
                        Rx Sensitivity : -36 to -31 dBm
  • Ethernet Cables: 10 Base-T (Cat. 3, 4, 5 UTP Cable - 100m max.)
    100 Base-TX (Cat.5 UTP Cable - 100m max.)
  • Management Interface: Console, DIP/Rotary Switch
  • Alarm Output: Relay

    • Power

  • Input Voltage : +10 ~ +30Vdc
  • Power input isolation: 1kV
  • Alarm Contact: One relay output with current carrying capacity of 2A @ 30Vdc
  • Power consumption: 0.3A@24Vdc (+/-5%, arrowed)
  • Protection : Power reverse polarity protection
  • Frame Ground for EMS Protection : Yes
  • Connection : 7-Pin Removable Terminal Block

    • Mechanical

  • Case : Plastic
  • Flammability : UL94V-0
  • Dimensions : 64mm x 110mm x 98mm (W x H x D)
  • Installation : DIN Rail Mount, Wall Mounting

    • Environmental

  • Operating Temperature : 0 to +70 °C
  • Storage Temperature : -20 to +85 °C
  • Ambient Relative Humidity : 10% to 90% non-condensing
    		•

    Technical

    Brochure

    Applications

    Building Redundancy and reliability into Ethernet Networks

    Recommendations

    Power Supplies
    Terms of Use | Privacy Policy | Resources | How to Order | Site Map